Iso 4014
Found 5 free book(s)Hexagon Head Bolts EN ISO 4014 (DIN 931) High Tensile
dinstock.comEN ISO 4014 (DIN 931) High Tensile Nominal Size and Thread diameter d Pitch of the thread (p) a Length of the thread (b) Depth of washer face (c) Transition Diameter (da) Diameter of unthreaded shank Dia. Of washer face (dw) Width across corners (e) Thickness of head (k) e Radius under head (r) Width across flats (s) oarse pitch olt
Lilla skruvskolan WEB - ROFAB
www.rofab.se• Skruv 8.8 enl ISO 4014/4017, FZV • Mutter kl.8 enl ISO 4032, FZV • Certifikat 3.1 enl ISO 10204 med samprovning ingår • Skruv och mutter märkta med ”SB 8.8” (vänd muttern med märket utåt) • Brickan beställes separat, vi rekommenderar HV200 • Skruv och mutter levereras tillsammans i samma kartong, CE-märkt
SERIES 500 Grassed Surface Water Channels 37 DRAINAGE …
www.standardsforhighways.co.uk(iii) Bolts and nuts for connecting plates shall comply with BS EN ISO 4014, BS EN 4017 and BS EN ISO 4032, for BS EN ISO 898-1 and BS EN 20898-2, ISO 898-2 property class 8.8, nominal size M20; or with BS 4395: Part 2, nominal size M20; or with BS EN ISO 898-1 and BS EN 20898-2, ISO 898-2 property class 10.9;
Geschraubte Verbindungen im Stahlbau - Stahlbauverband
www.stahlbauverband.atEN ISO 4014 5.6 8.8 10.9 EN ISO 4032 6 8 10 EN ISO 7089 EN ISO 7090 200 HV EN ISO 4017 300 HV EN ISO 4016 4.6 EN ISO 4034 4 5 EN ISO 7091 100 HV EN ISO 4018 Stahlbau (Deutschland) DIN 7990 4.6 5.6 EN ISO 4032 6 8 10 DIN 7989-1 DIN 7989-2 100 HV DIN 7968 5.6 Produktnorm EN 15048 - Garnituren (nicht vorgespannt)
Kukdo Epoxy Brochure - TRiiSO
www.tri-iso.comKD-4014 - 560 - Benzoin 4 4 - MFP-VP 6 6 Flow agent 2MI 2.5 2.5 - TiO2 R902 240 240 - Test Results Testing Items I II Remarks Gloss 104.6 105 60 o Cross-cutting 100/100 100/100 - Impact Resistance Pass Pass 1000g!50Cm *Curing condition : Preheating at 130¼C ! 20 min KD-3013 and KD-4014 Epoxy Resins are bisphenol-A type half-capped epoxy resin ...