Submersible Parts
Found 6 free book(s)EBARA Submersible Sewage Pumps DLFU Contents
www.pumpsebara.comProvide submersible sewage pumps suitable for continuous duty operation underwater without loss of watertight integrity to a depth of 65 feet. Pump system design shall include a guide rail system be such that the pump will be ... All major parts of the pumping unit(s) including casing, impeller, suction cover, wear rings, motor frame and discharge
EBARA Submersible Stainless Steel Pumps Optima/EPD
www.pumpsebara.comMajor parts of the pumping unit shall be manufactured of stainless steel. The casing, motor frame, and fasteners shall be manufactured of 304 stainless steel. The impeller and diffuser material shall be Thermo Plastic-Noryl GFN(2). The impeller shall be semi-open design. The pump(s) shall have a discharge size of 11/ 4'' NPT. 3. Shaft seal
SUBMERSIBLE PUMPS - Franklin Electric
franklinwater.comThe 3200 Series submersible pumps are designed so that all parts of the pump end, including the cable guard, fall within the diameter of Franklin Electric’s industry leading submersible 4" motor. This reduced diameter pump end makes it ideal for installations where the well is considered encrusted or tight in comparison to a standard 4" well.
Submersible Pumps GRUNDFOS SP
api.grundfos.com• Viton and Teflon parts make the SP suitable for aggressive water conditions • Stop ring protects the pump in case of up thrust MS and MMS Submersible Motors: Made to Match the Pump • Canned MS motors, 4” and 6”, up to 40 HP (30kW) • Rewindable MMS motors, 6”-10”, up to 250 HP (187 kW) • Water-filled motors
SUBMERSIBLE MOTORS - Franklin Electric
franklinwater.comDuring starting of a submersible pump, the torque developed by the motor must be supported through the pump, delivery pipe or other supports. Most pumps rotate in the direction which causes unscrewing torque on right-handed threaded pipe or pump stages. All threaded joints, pumps and other parts of the pump support system must
Submersible electric Pumps Product Catalogue
www.ebara.comSubmersible pumps in AISI 304 Submersible electric pump completely in AISI 304 stainless steel. The pump body, the impeller, the suction grille, the motor cover, the seal holder disc and the motor case are in AISI 304. The shaft is in AISI 303 (part in contact with the liquid). Double mechanical seal with oil chamber: the