Example: air traffic controller
Unitized Wheel Bearing Nut System
Found 2 free book(s)Axle Wheel Bearing Installation Specifications
cumberland-companies.comInitial Adjusting Nut Torque Tighten Adjusting Nut Install Tab Washer and Retainer Nut Final Adjusting Nut Torque (Counter-clockwise) d Acceptable End Play Trailer (TRIADTM wheel-end system) 150-200 lb-ft (204-272 Nm) Back off until loose 50-60 lb-ft (68-82 Nm) Back off 1/8 turn 20-25 lb-ft (27-34 Nm) 50 lb-ft (68 N m) 0.000" to 0.005" (0.000-0 ...
Bearing Setting Brochure - Timken Company
www.timken.comconventional truck non-driven wheel with a single adjusting nut design (Figure 3), manual setting involves tightening the adjusting nut while rotating the wheel until a slight bind is felt. Then the adjusting nut is backed off 1/6 to 1/4 turn to the nearest locking hole or suficiently to allow the wheel to rotate freely with some minimal end play.