Programming Guide PROFINET - Danfoss

← Back to document page

ENGINEERING TOMORROWProgramming GuidePROFINETVLT AutomationDrive FC Purpose of the Additional Document and Software Product Approvals and Symbols, Abbreviations, and Conventions42 Safety Qualified Safety Precautions53 Configure the PROFINET Configure the Configure the Frequency Converter94 PPO Process Control PROFIdrive Control FC Drive Control Profile185 Acyclic Communication (DP-V1) Features of an IO controller Features of an IO Supervisor Addressing Acyclic Read/Write Request Data Structure in the Acyclic Parameter Data Block246 Parameter Group 0-** Parameter Group 8-** Communication and Parameter Group 9-** Parameter Group 12-** PROFINET -specific Parameters34ContentsProgramming GuideMG06G102Danfoss A/S 04/2017 All rights Supported Object and Data Types387 Application Example: Process Data with PPO Type Example: Control Word Telegram Using Standard Telegram 1 Example: Status Word Telegram Using Standard Telegram 1 Example: PLC Example: PLC and network Monitoring448 No Response to Contro

bus network have a unique station name (host name). Set the PROFINET host name of the frequency converter via parameter 12-08 Host Name. 3.2 Configure the Controller 3.2.1 GSDML File To configure a PROFINET controller, the configuration tool needs a GSDML file for each type of device on the network. The GSDML file is a PROFINET xml file containing

  Guide, Controller, Programming, Network, Profinet, Programming guide profinet