Reliability-Centered Maintenance Methodology and ...

← Back to document page

Engineering, 2010, 2, 863-873. Published Online November 2010 ( ). Reliability-Centered Maintenance Methodology and Application: A Case Study Islam H. Afefy Industrial Engineering Department, Faculty of Engineering, Fayoum University, Al Fayyum, Egypt E-mail: Received September 15, 2010; revised September 27, 2010; accepted October 19, 2010. Abstract This paper describes the application of Reliability-Centered Maintenance Methodology to the development of Maintenance plan for a steam-process plant. The main objective of Reliability-Centered Maintenance is the cost-effective Maintenance of the plant components inherent reliability value.

general, failure modes, effects and criticality analysis (FMEA/FMECA) requires the identification of the fol-lowing basic information in Table 1. In Figure 4, algo-rithm for the calculation of equipments criticality is pre-sented. This figure shows the calculation steps of the equipments criticality The criticality is assessed based on the ...

  Analysis, Dome, Failure, Effect, Failure mode, Criticality, Effects and criticality analysis, Fmeca