SRV05-4 ESD Protection Diode Array

← Back to document page

Semiconductor Components Industries, LLC, 2011November, 2017 Rev. 31Publication Order Number:SRV05 4/DSRV05-4ESD Protection Diode ArrayLow Clamping VoltageThe SRV05 4MR6 surge Protection is designed to protect highspeed data lines from ESD, EFT, and Protects 4 I/O Lines Low Working Voltage: 5 V Low Clamping Voltage Low Capacitance (<5 pF) for High Speed Interfaces Transient Protection for High Speed Lines to:IEC61000 4 2 (ESD) 15 kV (air), 8 kV (contact)IEC61000 4 4 (EFT) 40 AIEC61000 4 5 (Lightning) 12 A TSOP 6 is Footprint Compatible with SOT 23 6 Lead, SC 59 6 Lead and SC 74 UL Flammability Rating of 94 V 0 This is a Pb Free DeviceTypical Applications High Speed Communication Line Protection USB and Power and Data Line Protection Digital Video Interface (DVI) Monitors and Flat Panel DisplaysMAXIMUM RATINGS (TJ = 25 C unless otherwise noted)RatingSymbolValueUnitPeak Power Dissipation8 x 20 ms @ TA = 25 C (Note 1)Ppk300WOperating Junction Temperatur

Surge protection devices are normally selected according to the working peak reverse voltage (VRWM), which should be equal or greater than the DC or continuous peak operating voltage level. 3. VBR is measured at pulse test current IT. 4. Non−repetitive current pulse per Figure 5 (Any I/O Pin to Ground) 5. For test procedure see Figures 3 and ...

  Devices, Protection, Surge, Surge protection device