Brass Ball Valve
Found 3 free book(s)Agilent GC, GC/MS, and ALS
www.agilent.com1/8-inch brass tees, tubing cutter, 1/8-inch brass caps, 7-mm nut driver, T-10 Torx driver, T-20 Torx driver, 4 open-end wrenches, and 1/8-inch ball valve (For TCD/ECD, also order an additional Gas Clean Filter CP17974.) Gas Clean Filter kit GC-MS 1/8in.,1/pk CP17974 Gas Clean filter kit with 1/8-inch fittings (order 2 if using
Class: 150 - 1500 Sizes: 1/2” - 12” - SCV Valve, LLC
www.scvvalve.comValve Type Bore Size Pressure Class Body/Bonnet Body Material Trim Material BAL = Ball .50 = 1/2” .5 = 50 B = Bolted 01 = Cast Iron 90 = Titanium 10 = CR13 DBV = Double Ball Valve .07 = 9/16” .7 = 75 H = Bar Stock 02 = A352/LCC 91 = Tantalum 11 = CR13/HF
Series LFe480 and LFG480 - Watts
media.wattswater.comThe valve must control each performance standard down to 0.25 gpm (1.00 lpm) for LFG480 and 0.5 gpm (1.90 lpm) for LFe480. Capacity of the valve must be 3 gpm (11 lpm) @ 45psi differen-tial or 4 gpm (15 lpm) @ 45psi differential. Thermostatic lavatory tempering valve shall be constructed using Lead Free* brass
Similar queries
Brass, Ball Valve, Valve, Ball