Guide to Weld Inspection for Structural Steelwork

Non-destructive testing (NDT) methods shall be selected in accordance with EN 12062 by personnel qualified according to Level 3 as defined in EN 473. Generally ultrasonic testing or radiographic testing applies to butt welds and penetrant testing or magnetic particle inspection applies to fillet welds.

  Testing, Destructive, Destructive testing

JEDEC STANDARD - Designer’s Guide

qualification tests. Devices that have been used in destructive qualification tests may not be used in subsequent qualification stresses except for engineering analysis. Non-destructive qualification tests are: Early Life Failure Rate, Electrical Parameters Assessment, External Visual, System Soft Error, and Physical Dimensions.

  Visual, Destructive

NORSOK STANDARD Z-008

4.1 General 7 4.2 Principles for risk evaluation and allocation of maintenance activities 7 4.3 Safety critical functions 8 4.4 Inspection of static process equipment 8 5 Functional hierarchy and criticality analysis 9 5.1 General 9 5.2 Necessary preconditions 10 5.3 System selection 11 5.4 Main function (MF) definition 11 5.5 Sub function ...

  General, Standards, Norsok, Norsok standard

IPC-6013D: Qualification and Performance Specification for ...

Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards 1 SCOPE 1.1 Statement of Scope This specification covers qualification and performance requirements of flexible printed boards. The flexible printed board may be single-sided, double-sided, multilayer, or rigid-flex multilayer.