Transcription of 10011388-B VentSure 4ft Heat & Moisture Strip ...
{{id}} {{{paragraph}}}
Example: marketing
10011388-B VentSure 4ft Heat & Moisture Strip ...
VentSure 4- foot Strip Heat & Moisture Ridge Vent with Weather PROtector Moisture BarrierINSTALLATION INSTRUCTIONSFig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5^Owens Corning VentSure 4' Strip Heat & Moisture Ridge Vent Installation Instructions VentSure 4 foot Strip Ridge Vents are designed for roofs with slopes of 3/12 to 16/12 pitches. Intake at the eave vents should be equal or exceed that of the ridge vent being installed. VentSure Ridge Vent is designed for residential NOTES 1. Before applying vent to architectural shingles, leave felt long at ridge and fold back under vent or caulk between low areas of shingle and fl ange of vent, making sure you don t plug drain holes. This will help prevent wind driven rain and snow from entering the See instructions for cutting For structures with different ridge heights, be sure to vent the higher ridge; it is also acceptable to vent lower ridges with For truss rafters, cut a 1 inch slot on each side of the ridge starting a minimum of 6 inches from the rake edge of the roof.
VentSure® 4-Foot Strip Heat & Moisture Ridge Vent with Weather PROtector® Moisture Barrier INSTALLATION INSTRUCTIONS Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 ^ Owens Corning® VentSure® 4' Strip Heat & Moisture Ridge Vent Installation Instructions
Tags:
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document: