Transcription of 6.4L DIT Power Stroke Diesel Engine Fuel Filter Change Guide
{{id}} {{{paragraph}}}
Example: stock market
6.4L DIT Power Stroke Diesel Engine Fuel Filter Change Guide
DIT Power Stroke Diesel Engine fuel Filter Change Guide For 2008 MY and later F-250 through F-550 Super Duty Trucks with the DIT Power Stroke Diesel Engine 3. Remove primary fuel Primary fuel Filter Location Filter and O-ring from under driver's side frame the fuel Filter cap. 4a. Replace the primary fuel Filter (white plastic Filter in kit) by snapping a new Filter element into the fuel 1. With a basin positioned below the fuel /water drain port, Filter cap. open fuel /water drain until water/ fuel mixture stops. 4b. Slide a new O-ring Note: Dispose of fuel properly. (provided) into posi- tion above the fuel Filter cap threads. 5. Screw the fuel Filter cap, with new Filter and O-ring, back into housing. Torque to 25. Nm (19 ). 2. Remove fuel Filter cap. Use a 36mm socket 6. Close the water and fuel drain port. This completes the primary fuel Filter Change . 4. Insert new second - Secondary fuel Filter Location ary fuel Filter (black plastic Filter in kit). into fuel Filter housing (see picture).
Secondary Fuel Filter Location 1. Remove fuel filter cap. Use a 24mm socket or 1/2 inch square drive 3. Remove excess fuel from housing with turkey baster.
Tags:
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document: