8500 and 9000 Replacement instructions for Awning Fabric ...

1B. REMOVAL OF THE Awning FROM THE COACHFIG. 11/2" TEKSCREWAWNINGRAILREMOVE FROMBOTH SIDESFABRICSECTIONTOPBRACKETS crewdriverElectric DrillStep Ladder3/16" PopRivetsPop RivetVise Grips Socket Wrench Set3/16" Drill Bit1/8" Pop RivetsEnd Cap GuideTools Required:FabricRoller TubeFor Models 8500 & 9000 torsion AssemblyREPLACEMENT instructions FOR AWNINGThe Fabric Roller Tube Assembly (FRTA) consists of a Fabric ,a roller tube and torsion extreme care. Springs under tension aredangerous. If not controlled they will unwindquickly. Keep hands and clothing clear of topcasting, as personal injury may GENERAL INSTRUCTIONS4. Remove both of the patio feet from their mountingbrackets and extend the adjustable arms until each patiofoot rests on the ground and lock button locks in a Slide the Awning Fabric or roller cover out of the To keep the awnings from unwinding during thisstep, be sure the cam lock lever is in the roll downposition.

Torsion Assembly REPLACEMENT INSTRUCTIONS FOR AWNING The Fabric Roller Tube Assembly (FRTA) consists of a fabric, a roller tube and torsion assemblies. Use extreme care. Springs under tension are dangerous. If not controlled they will unwind quickly. Keep hands and clothing clear of top casting, as personal injury may result. A. GENERAL ...

Tags:

  Spring, Torsion, Awning

Information

Related search queries