ADAPT Free d - swegon.com

1 ADAPTTM Free dInstallation Commissioning Maintenance20151013 / Art. No. 1545217 InstallationAll connections to the duct system should be done with a straight duct of the same dimension as the box inlet and with a length > 2 x D. If a flexible duct is used, it should be stretched so it remains as straight as possible, see figure The commissioning box can be suspended from a ceiling and connected to a duct diffuser is secured to the ceiling by connecting the M8 threaded rod (A) into the popnut on the top of the diffuser, see figure 3. 2. Make sure that the orientation of the sensor module aligns with the extension of the room, see figure 2. If the connecting duct does not enter the room as in the example in figure 4, the frontplate of the diffuser must be dismantled and rotated in a direction with the sensor module directed as shown in figure 2.

2 Swegon reserves the right to alter speciflcations. 20151013 www.swegon.com WIE Maintenance The exterior surface of the ADAPT air diffusers can be

Loading..

Tags:

  Diffusers, Swegon, Air diffusers

Information