Transcription of AN4488 Application note - STMicroelectronics
{{id}} {{{paragraph}}}
Example: bachelor of science
AN4488 Application note - STMicroelectronics
October 2018AN4488 Rev 71/50AN4488 Application noteGetting started with STM32F4xxxx MCU hardware development IntroductionThis Application note is intended for system designers who require an overview of the hardware implementation of the development board, with focus on features like power supply package selection clock management reset control boot mode settings debug document shows how to use the high-density high-performance microcontrollers listed in Ta b l e 1, and describes the minimum hardware resources required to develop an Application based on those reference design schematics are also contained in this document, together with descriptions of the main components, interfaces and 1. Applicable productsTypePart numbers and Product linesMicrocontrollersSTM32F401xB / STM32F401xCSTM32F401xD / STM32F401xESTM32F405/415 lineSTM32F407/417 lineSTM32F410x8 / STM32F410xBSTM32F411xC / STM32F411xESTM32F412xE / STM32F412xGSTM32F413/423 lineSTM32F427/437 lineSTM32F429/439 lineSTM32F446 lineSTM32F469/479 Rev 7 Contents1 Reference documents.
single Tantalum or Ceramic capacitor (min. 4.7 µF typ.10 µF) for the package + one 100 nF Ceramic capacitor for each VDD pin. • The VBAT pin can be connected to the external battery (1.65 V < VBAT < 3.6 V). If no external battery is used, it is recommended to connect this pin to VDD with a 100 nF external ceramic decoupling capacitor.
Loading..
Tags:
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document: