Certificate or document Reference - IRClass

LIST OF CERTIFICATES AND DOCUMENTS REQUIRED TO BE CARRIED ON BOARD CARGO SHIPS EXCEPT HIGH SPEED CRAFT Certificate or document Reference Applicability Oil tanker ...

  Document, Reference, Certificate, Certificate or document reference

New IMO Requirements coming into force from …

Annex-1: Summary of new IMO requirements coming into force from 01 September 2017 until 2018 Sr. No Convention/ Regulation …

  Form, Requirements, Coming, Into, Force, Imo requirements coming into force from

DOCKING SURVEY CHECKLIST - IRClass

Condition to be reported using number code as follows: 1. When examined found to be satisfactory and/or examined/tested satisfactory and/or confirmed arrangements exist in satisfactory condition.

  Conditions, Checklist, Survey, Docking, Docking survey checklist

Ballast Water Management 2016 - IRCLASS

Guidelines on Ballast Water Management 2016 Indian Register of Shipping IRS-G-ENV-01 Page | 7 Scope The International Maritime Organization (IMO) has developed international

  Guidelines, 2016, Management, Water, Ballast, Ballast water management 2016

Rules and Regulations for the Construction and ...

indian register of shipping . rules and regulations for the construction and classification of . single point mooring systems . june 2014

  System, Construction, Classification, Mooring, Mooring system, For the construction and classification of

Certificate or document Reference

LIST OF CERTIFICATES AND DOCUMENTS REQUIRED TO BE CARRIED ON BOARD CARGO SHIPS EXCEPT HIGH SPEED CRAFT Certificate or document Reference Applicability Oil tanker ...

Implementing Energy Efficiency Design Index (EEDI)

Energy Efficiency Design Index (EEDI), formulated for new ships, is an index that estimates grams of CO2 per transport work (g of CO2 per tonne‐mile). It can be expressed as the ratio of “environmental cost” divided by “Benefit for Society”. In other words, It is a function of

  Design, Efficiency, Index, Energy, Eides, Energy efficiency design index

Annex - 1 Fire-fighting Systems and Appliances Summary …

Test all fire detection systems and fire detection systems used to automatically release fire-extinguishing systems for proper operation, as appropriate MSC.1/Circ.1432, para 7.2.1 All Annually Ship Visually inspect all accessible detectors for evidence of tempering obstruction, etc., so that all detectors are inspected within one year

  System, Fire, Summary, Fighting, Appliances, Fighting systems and appliances summary

A GUIDE TO BALLAST WATER MANAGEMENT

ballast water is filled through the top of the ballast tank with simultaneous discharge from the bottom at the same flow rate and maintaining a constant level in the tank throughout the ballast exchange operation. At least three times the tank volume is to be pumped through the tank.

  Water, Ballast, Ballast water

LIST OF CERTIFICATES AND DOCUMENTS REQUIRED TO …

Permanently exhibit for guidance of crew , showing clearly each deck and control station, fire section including fire detection , fire extinguisher appliance SOLAS 1974, regulations II-2/15.2.4 and II-2/15.3.2 Vessels >= 500 GT X X X X X X Onboard training and drills record

  Document, Guidance, Lists, Required, Certificate, List of certificates and documents required to

DNVGL-ST-0378 Offshore and platform lifting appliances

Sheaves and spooling devices for subsea operations [9.3.4] Additional requirements addressing sheaves and spooling devices. Skid requirements [E.1.3] Specific requirements in the text removed, and replaced with reference to DNVGL-ST-E273. Software testing with use of simulators [14.6.1] Requirement for simulator testing clarified. Launch and ...

  Testing, Sheave

Johnson Products - Gunnebo Industries

with 3 sheaves or less • Sheave shrouds, all models • All weighted models have detachable cheek weights in cast iron or steel • Proof test and certification, radiographic, magnetic particle, and other non-destructive testing to specification by customer • Bronze bushings available • Other sheave combinations available

  Testing, Sheave

Engineering Data for Copper and Aluminum Conductor ...

Power and Control Cables used on Take-up Reels and Sheaves 42 TABLE 7 - 9 Galvanized Steel Wire - Tensile Strength - Weight - Diameters 46 TABLE 7 - 10 Sag Messenger Characteristics 47 TABLE 7 - 11 Sag Tables 49 TABLE 7 - 12 Sag Calculating Charts 50 TABLE 7 - 13 Sag Calculating Charts 51 SECTION 8 High Voltage Proof Testing

  Testing, Sheave

DNVGL-ST-0358 Offshore gangways

• Sec. 7 Testing and marking — Section renamed. — Sec.7 [7.1]: New section has been added. — Sec.7 [7.2.1]: Section has been updated to include requirements for gangways part of/ not part of a class notation — Sec.7 [7.2.4]: Section has been updated to include more detailed testing requirements and simulator based testing

  Testing

Product Line at a Glance - Miller Products

sheaves. Sheaves for our Hi-Lift Blocks are cast or roll forged and are equipped with cylindrical or tapered roller bearings, or bronze bushings by request. See pages 42 - 52 Miller Mobile Crane Blocks feature an extended design to allow reeving with the rope end fitting in place, DIN 15401 single or DIN 15402 duplex hooks with

  Sheave

Aerial/Boom/Scissor Lift Inspection Checklist

4. Testing conducted to ensure that atmosphere remains safe. 5. Emergency Response Equipment readily available where a hazardous atmosphere could or does exist. 6. Employees trained in the use of Personal Protective and Emergency Response Equipment. 7. Safety harness and lifeline individually attended when employees enter deep confined excavation.

  Testing

Vane Axial Fans - Greenheck-USA

sheaves may cause excessive vibration. A complete vibration test will find these problems before the fan leaves the factory. Electrostatic Powder Paint and Protective Coatings All internal and external steel components are electrostatically powder painted prior to assembly with an industrial polyester urethane, Permatector™.

  Sheave

API Recommended Practice 8B

API Recommended Practice 8B Recommended Practice for Procedures for Inspections, Maintenance, Repair, and Remanufacture of Hoisting Equipment