Architectural Woodwork Standards millwork 6

©2014 AWI | AWMAC | WI 2nd Edition, October 1, 2014 Architectural Woodwork Standards 131 section 6 Millwork 6 introductory information Guide specifications are available through the sponsor associations in interactive digital format

Architectural Woodwork Standards ... - Woodwork Institute

©2014 AWI | AWMAC | WI 2nd Edition, October 1, 2014 Architectural Woodwork Standards 73 SECTION 4 Sheet Products 4 introductory information INTRODUCTION Section 4 is the second “material” section.

  Material

Architectural Woodwork Standards doors 9

eXterIor doors Wood doors are not recommended for exterior use. Most flush doors no longer have extended exterior use warranties and some have no warranty at all. Refer to manufacturers’ written warranty for specifics. Wood doors used in an exterior environment should be water repellent treated at the factory after manufacturing.

  Doors

Architectural Woodwork Standards finishing 5

requirements. Choose performance characteristics which meet, but do not exceed, the needs of your project in the interest of value engineering. • Varying costs of finish systems typically relate directly to their performing characteristics. • Intermixing systems will likely cause quality and/or performance problems; they are usually

  Performance, Standards, Woodworks, Architectural, Architectural woodwork standards

SAMPLE ARCHITECTS ORIGINAL ... - Woodwork Institute

SAMPLE SHOP DRAWINGS NOTE: 1. THESE ARE SAMPLE DRAWINGS ONLY; ALL NAMES ARE FICTITIOUS. 2. MINIMUM SHEET SIZE REQUIRED BY W.I. IS 11” x 17”. 3. THESE DRAWINGS ILLUSTRATE DETAILS REQUIRED BY W.I. a. Refer to the Archetectural Woodwork Standards, Section 1, Submittals. 4. ALL INFORMATION INCLUDED IN THE …

  Woodworks

AWS EDITION 1, 2009 - Woodwork Institute

as registered AIA/CES instructors, they also provide numerous hours of standards/quality assurance/industry-based education. Additionally, our DAS’s are available as an unbiased, industry consultation service.

  Standards, Quality, Edition

STRUCTURAL/ARCHITECTURAL COORDINATION CHECKLIST

Apr 21, 2016 · Considerations. This Design Guide contains tables summarizing recommended deformation criteria for various cladding elements. 12. Confirm that loading, strength, and serviceability criteria in the architectural Specification for the exterior wall system are consistent with your structural design for the support of the exterior wall.

  Specification, Architectural, Considerations, Coordination, Architectural specification, Architectural coordination

Section VI. Specifications

D. The Contractor shall construct All Architectural, Structural, Electrical, Sanitary/ Plumbing, Mechanical / Fire Protection works in accordance with the Plans and Specifications. All items shown on the Plans but not mentioned in the Specifications shall be included. Discrepancies shall be verified with the Procuring Entity. E.

  Architectural

EVERGUARD TPO/PVC MECHANICALLY ATTACHED

• Architectural Information Services (AIS) is a specification service that helps you to specify an approved GAF roofing system based on your specific roofing needs and will send you a general specification for that roofing system, as well as application methods, product description, and detail drawings. The phone number for AIS is 800-522-9224.

  Specification, Architectural

UltraPly TPO Application Guide - firestonebpco.com

D. Secure Wood Nailer 1. Wood nailers must be firmly fastened to the deck or building. 2. Mechanically fasten wood nailers to resist a min. force of 200 lb/f (890 N) in any direction. 3. Refer to attachment requirements of the roofing system as specified by the project designer if greater than 200 lb/f (890 N). E. Taper Wood Nailer

  Guide, Applications, Woods, Application guide

Glulam Product Guide - American Laminators

construction, wood’s low thermal con - ductivity makes it a superior material. As an insulator, wood is six times more efficient than an equivalent thickness of brick, 105 times more efficient than concrete, and 400 times more efficient than steel. 7 Good news for a healthy planet.For every ton of wood grown, a young forest produces 1.07 tons of

  Woods

Glulam Product Guide - Public.Resource.Org

neered wood construction. Glulam is an engineered wood product that optimizes the structural values of a renewable resource – wood. Glulam members are composed of individual pieces of dimension lumber. The pieces are end-jointed together to produce long lengths which are then bonded together with adhesives to create the required beam dimensions.

  Woods

NFPA CODE PROVISIONS AND FIRE-RETARDANT-TREATED …

of fire by the wood is eliminated. Section 45.2.8.1 of NFPA 5000, Section 3.3.99 of NFPA 101, and Section 3.3.2 of NFPA 703, Standard for Fire Retardant – Treated Wood and Fire-Retardant Coatings for Building Materials, define FRTW as “A wood product impregnated with chemicals by a pressure process or other means during manufacture, which is

  Woods

Mass Timber Design Guide - Structurlam

Design Specification (NDS) recognize CLT as a structural system; however, it must be manufactured according to the ANSI/ APA PRG-320 2012 Standard for Performance Rated Cross-Laminated Timber. The IBC approves the use of CLT in exterior/ interior walls, floors and roofs for Type IV Construction and

  Specification