BASIC TECHNICAL INFORMATION FOR REAMERS
REAMERSREAMER GUIDEBASIC TECHNICAL INFORMATION FOR REAMERSHANNIBAL CARBIDE would like to inform you of some BASIC TECHNICAL knowledge regarding REAMERS . Following these guidelines will reduce overall set-up time, while increasing productivity. Selecting the right tool, proper stock removal and correct speeds and feeds are all important and covered here in the HANNIBAL Reamer Guide. Ream it right the first time with the Hannibal TECHNICAL TeamFLUTE STYLESS traight: Best suited for non-chip forming materials, cast iron, bronze and free cutting brass. Preferred hole condition would be a thru Hand Spiral: Designed to pull the chip out of the hole in a blind hole application. Due to aggressive flute geometry, a right hand spiral may cut slightly oversized. Effective in bridging interruptions, such as keyways, cross-holes, etc. Excellent in highly ductile Hand Spiral: Excellent in thru holes, as the flutes tend to push the chips out ahead of the reamer.
REAMERS REAMER GUIDE BASIC TECHNICAL INFORMATION FOR REAMERS DEVELOPING OPTIMUM SPEED AND FEEDS • Most reamer manufacturers will provide you with a starting point for speeds and feeds.
Link to this page: