D155AX - komatsu.jp

2 3 WALK-AROUND D155AX-6 HORSEPOWER Gross: 268 kW360 HP @ 1900 rpm Net: 264 kW354 HP @ 1900 rpm OPERATING WEIGHT 39500 kg 87,100 lb BLADE CAPACITY SIGMADOZER: 9.4 m3 12.3 yd3 D155AX-6 C RAWLER D OZER CRAWLER DOZER PCCS (Palm Command Control System) Electronic controlled PCCS travel control

  D155ax

PC2000-8 BACKHOE

Enlarged track rollers, in combination with the largest size track links, provide excellent durability. Sturdy Guard and Large Track Link Heat resistant H-NBR seal and pack-ing are employed for the hydraulic equipment and power train com-ponents. The heat resistant rubber employed for the hydraulic hose has extended its life 1.5 - 2 times.

  Rubber, Roller, Backhoe, Pc2000, Pc2000 8 backhoe

CEN00223-03 PC400-8, PC400LC-8 CRAWLER EXCAVATORS

PC 400 Photos may include optional equipment. HORSEPOWER Gross: 270 kW 362 HP / 1900 min-1 Net: 257 kW 345 HP / 1900 min-1 OPERATING WEIGHT PC400-8: 41740 – 42590 kg

  Crawler, Cp400, Pc400lc, Cen00223 03 pc400 8, Cen00223, Pc400lc 8 crawler

熱電発電による工場排熱回収 - komatsu.jp

to be 20 to 30 kW and this waste heat is converted into electricity by the thermoelectric generating system. The thermoelectric generator consists of sixteen thermoelectric generating modules made of a Bi-Te thermoelectric material. Each thermoelectric generating module is 50mm wide and deep and 4.2mm high.

  Generators, Thermoelectric, Thermoelectric generator

D D61PX D61EX - komatsu.jp

c rawler d ozer. walk-around d61-15e0 d61ex/px-15e0 c rawler d ozer crawler dozer 2 3 horsepower gross: 127 kw170 hp @ 1850 rpm net: 125 kw168 hp @ 1850 rpm operating weight d61ex-15e0: 16710 kg36,840 lb d61px-15e0: 18710 kg41,250 lb blade capacity pat dozer: d61ex-15e0: 3.4 m3 4.4 yd3

  Zero, Crawler, Rawler, Dozer, C rawler d ozer crawler dozer, C rawler d ozer

D85PX-15E0: 27650 kg D85EX D85PX

C RAWLER D OZER Photo may include optional equipment. 2 3 WALK-AROUND Simple hull frame and monocoque track frame with pivot shaft for greater reliability. See page 8. D85-15E0 Extra-low machine profile provides excellent machine balance and low center of gravity. SAA6D125E-5 turbocharged after-cooled

  Zero, Rawler, C rawler d ozer

PC 200 PC200 - komatsu.jp

400-liter high-capacity fuel tank. Effec-tive corrosion resistance using rust-The PC200-8M0’s cab floormat is easy proof treatment. to keep clean. The gently inclined sur-face has a flanged floormat and drainage holes to facilitate runoff. Removes water and contaminants in the fuel to pre-vent fuel problems. (With built-in prim-ing pump)

  Tanks

HD 465 HD465 - komatsu.jp

HD 465 HORSEPOWER Gross: 551 kW 739 HP/2000 min-1 Net: 533 kW 715 HP/2000 min-1 MAXIMUM PAYLOAD 55 metric tons BODY CAPACITY (Heaped 2:1, SAE) 34.2 m3 HD465-7R Photos may include optional equipment.

  Gross, Horsepower, Hd465, Hd 465 hd465, Hd 465 horsepower gross, 551 kw

HM 400 HM400 - komatsu.jp

HM 400 HORSEPOWER Gross: 338 kW 453 HP/2000min-1 Net: 334 kW 448 HP/2000min-1 MAXIMUM PAYLOAD 40 metric tons BODY CAPACITY (Heaped 2:1, SAE) 24.0 m3 HM400-3M0 Photos may include optional equipment.

PC228US PC228USLC - 小松製作所

BUCKET CAPACITY 0.50 – 1.00 m3 0.65 – 1.31 yd3 Komatsu’s PC228US-8 Series Hydraulic Excavators have a short tail swing profile, designed specifically for work in confined areas. By reducing tail swing, the PC228US-8 can work in areas where conventional profile excavators would pose a safety risk. Ecology and Economy Features Low Emission ...

  Bucket

general engineering hydraulic & PNEuMaTic SyMBOlS

For port identification and operator marking see iso 9461 (hydraulic) or bs iso 5599 (Pneumatic). ... Valve control - lever Valve control - Pedal Valve control - Electro-hydraulic (pilot operated dcV) ... directional control valves (dcV's) direct operated (by solenoid) dcV’s 4/2 “spring return” or

  Control, Operator, Valves, Directional, Lever, Directional control valves

A guide to selecting a manual hydraulic directional ...

Directional control valves are probably the most common of all hydraulic components and are used to control the starting, ... position when the operator releases the lever or to prevent a machine operation unless the valve is actuated. From a safety point of view however, consideration must be given ...

  Manual, Control, Operator, Selecting, Hydraulic, Valves, Directional, Lever, Directional control valves, Selecting a manual hydraulic directional

Directional Control Valve Equipment for Front End Loaders

Complete control. One of the most critical factors for any loader operator today is absolute control of the load at all times. This is made easier by the use of well-designed valves that include load holding check valves and ‘turned’ spools which not only allow the operator to have absolute control

  Control, Operator, Valves, Directional, Directional control

Specalog for 140H Motor Grader, AEHQ5449

Implement Control Valves. PPPC valves have different flow rates for the head and rod ends of the cylinder. This insures consistent extension and retraction properties for each cylinder, and improves operator ‘feel’ and system response. All control valves use lock valves to maintain blade settings. Line relief valves protect cylinders from

  Control, Operator, Valves, Control valves

Chapter 11: Valves and Actuators with the NAMUR-interface

This can be easily controlled by using 5 -way directional control valves (5/2-way for fully opening and closing the process valve, 5/3 -way if intermediate positions are required). In single-acting actuators , the reset to basic position is realized by using packs of mechanical springs.

  Control, Valves, Directional, Directional control valves

CAMERON Fully Welded Ball Valves - TEXPETROL

valves. Operating levers must be ordered separately. Information on special trims and API configurations are available upon request Specify the following when ordering another manufacturer’s power operator to fit a CAMERON fully welded ball valve: 1. Valve size and pressure class and, if for field conversion, the present operator 2.

  Operator, Valves

Versa V316 Series Stainless Steel Solenoid Valves

The V-316 Valve Series provides a full range of control valves suited to the most demanding of applications. Ruggedly constructed, both internally and externally, of stainless steel, these valves are able to withstand the physical abuse of corrosive environments and controlled media.

  Series, Control, Valves, Control valves, V316 series, V316