GM Inline Engines

Chapter Six GM Inline Engines This chapter covers the GM 153 and 181 cid The oil pump is located on the bottom front of 4-cylinder Engines and the GM 194, 230, 250 and the block on the starboard side and is driven by the 292 cid 6-cylinder Inline Engines used on distributor shaft. The distributor is driven by a gear MerCruiser 110 through 200 models. Although on the camshaft. differing in displacement, these Engines are Specifications (Table 1 and Table 2) and essentially the same design with many tightening torques (Table 3) are at the end of the interchangeable parts. chapter. These Engines are used with the following MerCruiser models: a. Model 110, 120, 120R and 120MR-153 cid. b. Model 140-181 and 194 cid. ENGINE SERIAL NUMBER.

lifting points on the engine, 5. The engine should not be dtJicult to lift with a proper hoist. If it is, stop lifting, lower the engine back onto its mounts and make sure the engine has been completely separated from the boat. 1. Remove the engine hood cover and all panels that interfere with engine removal. Place to one side out of the way. 2.

Loading..

Tags:

  Lifting

Information