Transcription of Intergard 740 - Kemipaz
{{id}} {{{paragraph}}}
Example: bachelor of science
Intergard 740 - Kemipaz
A two component epoxy finish coat suitable for brush, roller and spray application. PRODUCT DESCRIPTIONAs a tough, hard wearing finish for application over properly primed surfaces. Exhibits good abrasion resistance, and affords good protection against spills and splashes of a range of chemicals such as acids, alkalis, solvents, and salt solutions. Suitable for use in a wide range of environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills, and the power industry. INTENDED USESWide range via the Chromascan system High Gloss 51% 3% (depends on colour)50 microns (2 mils) dry equivalent to 98 microns ( mils) m /litre at 50 microns and stated volume solids409 gallon at 2 mils and stated volume solidsAllow appropriate loss factors Airless Spray, Air Spray, Brush, Roller PRACTICAL INFORMATION FOR Intergard 740 ColourGloss LevelVolume SolidsTypical ThicknessTheoretical CoveragePractical CoverageMethod of ApplicationDrying TimeTemperature Touch DryHard DryMinimumMaximum See International Protective Coatings Definitions and Abbreviations Overcoating Interval withrecommended topcoats10 C (50 F) 12 hours40 hours40 hours Extended 15 C (59 F) 8 hours30 hours30 hours Extended 25 C (77 F) 3 hours16 hours16 hours Extended 40 C (104 F) 2 hours11 hours11 hours Extended Part A 27 C (81 F); Part B 29 C (84 F); Mixed 28 C (82 F) kg/l ( lb/gal)REGULATORY DATAF lash PointProduct WeightVOCSee Produ
Intergard ® 740 Epoxy All surfaces to be coated should be clean, dry and free from contamination. Prior to paint application all surfaces should be assessed and treated in accordance with ISO 8504:2000.
Loading..
Tags:
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document: