Epoxy - AkzoNobel

Jun 27, 2017 · A two component epoxy anti-corrosive primer pigmented with zinc phosphate. PRODUCT DESCRIPTION For use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems for use in the offshore, petrochemical, chemical, pulp and paper and bridge industries.

  Phosphate, Zinc, Zinc phosphate

Interzinc - AkzoNobel

Nov 23, 2016 · Inorganic Zinc-Rich Silicate Prior to overcoating, Interzinc 22 must be clean, dry and free from both soluble salts and excessive zinc corrosion products. Surface temperature must always be a minimum of 5°F (3°C) above dew point. When applying Interzinc 22 in confined spaces, ensure adequate ventilation.

  Zinc, Interzinc

Epoxy Zinc-Rich

May 16, 2017 · A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20. PRODUCT DESCRIPTION As a high performance primer to give maximum protection as part of any anti-corrosive coating system for aggressive environments including those found on offshore structures, petrochemical

  Zinc, Rich, Zinc rich

Rapid Recoat Epoxy - AkzoNobel

Sep 22, 2015 · A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. PRODUCT DESCRIPTION As a primer for steelwork intended for use in a wide range of aggressive environments, including

  Phosphate, Zinc, Zinc phosphate

Intercure 200HS - AkzoNobel

Sep 22, 2015 · This product is intended for use only by professional applicators in industrial situations in accordance with the advice given on this sheet, the Material Safety Data Sheet and the container(s), and should not be used without reference to the Material Safety Data Sheet (MSDS) which International Protective Coatings has provided to its customers.

  Product, Sheet, Data, Data sheet

Interzone 954 - AkzoNobel

Aug 21, 2017 · Interzone 954 may be applied to suitably sealed or primed concrete; contact International Protective Coatings for further advice on specification and primers. Interzone 954 can be used as a non-skid deck system by modification with addition of GMA132 (crushed flint) aggregate. Application should then be to a suitably primed surface.

  Specification, Protective, Coating, Protective coatings

Interline 984 - AkzoNobel

A two component, solvent free chemically resistant heavy duty epoxy phenolic tank lining. DESCRIPTION PRODUCT Interline 984 is intended as a lining for the protection of ferrous and non-ferrous substrates (including concrete).

  Interline, Interline 984

Chartek 1709 - AkzoNobel

Nov 20, 2017 · Airless Spray Airless Spray Thinner Cleaner Work Stoppages Clean Up Trowel Suitable Typically thinned by up to 5% solvent 15°C (59°F) 25°C (77°F) The above figures are for trowel application. Working pot life is not applicable for plural airless spray application as the product is only mixed at the spray gun, at the point of application.

  Spray

ISO12944 - AkzoNobel

ISO12944 is the industry standard for corrosion protection of steel structures by protective paint systems. Originally released in 1998, the standard is put together by representatives from key countries and companies ... All offshore systems must continue to go through 4,200 hours of cycling testing, which equates to 25 weeks.

  Corrosion, Offshore

Chartek 7 - AkzoNobel

May 19, 2015 · Chartek 7 is a high performance epoxy intumescent fire protection coating system. DESCRIPTION The product is a high build, two pack material providing excellent durability and combined corrosion and fire protection. Tested and certified by Lloyd's Register (LR) and Det Norske Veritas (DNV) for structural and divisional fire protection. PRODUCT

  Coating, Intumescent, Chartek, Chartek 7

ELECTROLYTIC ZINC COATING ELECTROLYTIC ZINC …

12 4+8 4 finish and chromate treatment typical appearance designation z trasparent, clear a trasparent with slight iridescence (bleached) b yellow iridescent c olive green brown d black r electrolytic zinc coatings (extract from iso 4042)

  Coating, Zinc, Zinc coatings

Powder Coating as a Corrosion Protection Method - Teknos

powder coatings do not contain organic volatile compounds, coating with powder is an excellent alternative with respect to reducing solvent emissions. Totally sol-vent-free INFRALIT powder coatings meet the directive 1999/13/EC Eu emission standards. INFRALIT powder coatings (with the ex-ception of the so-called zinc-rich powder

  Coating, Zinc

ISO 12944-5:2018 Sherwin Systems Coatings Guide English

4 Organic zinc Zinc Clad IV EU 60 Element Epoxy Macropoxy 646 150 ERO027446-16-C4VH Polyurethane Acrolon 7300 50 ... ISO 12944-5:2018 Sherwin Systems Coatings Guide English Sherwin-Williams ...

  Coating, Zinc, Zinc zinc

Intertherm 50 - AkzoNobel

Oct 30, 2017 · Any coatings present on the surface must be removed prior to the application of Intertherm 50. Hand or power tool clean to a minimum St3 (ISO 8501-1:2007) or SSPC-SP3. ... Intertherm 50 is suitable for application to unweathered steelwork freshly coated with zinc silicate shop primers. If the zinc shop primer shows extensive or widely scattered ...

  Coating, Zinc, Intertherm, Intertherm 50

ZINC COATINGS - American Galvanizers Association

zinc is anodic to steel and will sacrificially corrode to protect the underlying steel from corrosion. There are a number of zinc coatings which are often generically termed “galvanizing,” but each has unique characteristics. These characteristics not only affect applicability, but also economics and performance in the environment.

  Coating, Zinc, Zinc coatings

Guidance Notes on the Application and Inspection of Marine ...

1992 1994 1996 1998 2000 2002 2004 2006 2008 2010 2012 2014 IACS UR Z9 (Rev.1 1992, last Rev. 1996), Corrosion Protection Coatings for Cargo Hold Spaces on Bulk Carriers.

  Coating

Protective MACROPOXY 646 FAST CURE EPOXY Marine …

Revised: October 19, 2016. MACROPOXY ® 646. FAST CURE EPOXY. P. ART. A B58-600 S. ERiES. P. ART. B B58V600 H. ARdEnER. Protective