Chartek 1709 - AkzoNobel

Nov 20, 2017 · Airless Spray Airless Spray Thinner Cleaner Work Stoppages Clean Up Trowel Suitable Typically thinned by up to 5% solvent 15°C (59°F) 25°C (77°F) The above figures are for trowel application. Working pot life is not applicable for plural airless spray application as the product is only mixed at the spray gun, at the point of application.

  Spray

Interline 984 - AkzoNobel

A two component, solvent free chemically resistant heavy duty epoxy phenolic tank lining. DESCRIPTION PRODUCT Interline 984 is intended as a lining for the protection of ferrous and non-ferrous substrates (including concrete).

  Interline, Interline 984

Epoxy - AkzoNobel

Jun 27, 2017 · A two component epoxy anti-corrosive primer pigmented with zinc phosphate. PRODUCT DESCRIPTION For use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems for use in the offshore, petrochemical, chemical, pulp and paper and bridge industries.

  Phosphate, Zinc, Zinc phosphate

Intercure 200HS - AkzoNobel

Sep 22, 2015 · This product is intended for use only by professional applicators in industrial situations in accordance with the advice given on this sheet, the Material Safety Data Sheet and the container(s), and should not be used without reference to the Material Safety Data Sheet (MSDS) which International Protective Coatings has provided to its customers.

  Product, Sheet, Data, Data sheet

ISO12944 - AkzoNobel

ISO12944 is the industry standard for corrosion protection of steel structures by protective paint systems. Originally released in 1998, the standard is put together by representatives from key countries and companies ... All offshore systems must continue to go through 4,200 hours of cycling testing, which equates to 25 weeks.

  Corrosion, Offshore

Chartek 7 - AkzoNobel

May 19, 2015 · Chartek 7 is a high performance epoxy intumescent fire protection coating system. DESCRIPTION The product is a high build, two pack material providing excellent durability and combined corrosion and fire protection. Tested and certified by Lloyd's Register (LR) and Det Norske Veritas (DNV) for structural and divisional fire protection. PRODUCT

  Coating, Intumescent, Chartek, Chartek 7

Epoxy Zinc-Rich

May 16, 2017 · A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20. PRODUCT DESCRIPTION As a high performance primer to give maximum protection as part of any anti-corrosive coating system for aggressive environments including those found on offshore structures, petrochemical

  Zinc, Rich, Zinc rich

Rapid Recoat Epoxy - AkzoNobel

Sep 22, 2015 · A two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. PRODUCT DESCRIPTION As a primer for steelwork intended for use in a wide range of aggressive environments, including

  Phosphate, Zinc, Zinc phosphate

Interzone 954 - AkzoNobel

Aug 21, 2017 · Interzone 954 may be applied to suitably sealed or primed concrete; contact International Protective Coatings for further advice on specification and primers. Interzone 954 can be used as a non-skid deck system by modification with addition of GMA132 (crushed flint) aggregate. Application should then be to a suitably primed surface.

  Specification, Protective, Coating, Protective coatings

Interthane 990 - AkzoNobel

Apr 27, 2015 · Warning: Contains isocyanate. Wear air-fed hood for spray application. SAFETY PRECAUTIONS PACK SIZE Unit Size Part A Part B Vol Pack Vol Pack For availability of other pack sizes, contact International Protective Coatings. 20 litre 17.14 litre 20 litre 2.86 litre 3.7 litre 5 US gal 4.29 US gal 5 US gal 0.71 US gal 1 US gal SHIPPING WEIGHT (TYPICAL)

  Safety, Isocyanate

TECHNICAL MANUAL OPERATOR’S, UNIT, DIRECT SUPPORT, …

(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) TRAILER, CARGO: 2040 POUNDS, 2-WHEEL M1101 (2330-01-387-5443) ... industrial-type vacuum cleaner. Clean dust or mud away from brake components with water and a wet, soft brush or cloth. ... Dry cleaning solvent, P-D-680, is toxic and flammable Always wear goggles and gloves and use solvent only in ...

  Industrial, Part, Cleaner, Solvents

INDUSTRIAL - SOLVENT PARTS CLEANER - Fountain Industries

7578 Page 1 11-01-12 ECN 3783 INDUSTRIAL - SOLVENT PARTS CLEANER . REMOTE RESERVOIR CM216 and CM230 . I. Introduction . A. Manufacturer’s Statement . This manual will provide you with important information about the Parts Cleaners and will Solvent

  Industrial, Solvents, Industrial solvent parts cleaner

STODDARD SOLVENT

dry cleaning sollvent, and as a general cleaner and degreaser. It is produced and used as a colorless, flammable liquid but will turn into a vapor (gas) at temperatures ranging from 150-200°C. Stoddard solvent smells and tastes like kerosene. You can smell it when the level in the air is about 0.34 parts of Stoddard solvent in a million parts ...

  Part, Cleaner, Solvents, Stoddard, Stoddard solvent

Trichloroethylene (TCE) Fact Sheet

degreasing. It is also used as a raw material to make other chemicals, as a cleaner in electronics manufacturing, and for all sorts of general solvent purposes such as in paints, paint strippers, and adhesives. It has also been used as a low-temperature refrigerant and as a grain fumigant, and is still sometimes used in dry cleaning.

  Cleaner, Solvents

Surface Tolerant Epoxy - AkzoNobel

Jan 22, 2019 · Mix Ratio 5.67 parts : 1.00 part by volume Working Pot Life 10°C (50°F) 15°C (59°F) 25°C (77°F) 40°C (104°F) 5 hours 3 hours 2 hours 1 hour Airless Spray Recommended Tip range 0.45-0.58 mm (18-23 thou) Total output fluid pressure at spray tip not less than 2 176 kg/cm (2,500 p.s.i.) Air Spray Recommended Gun DeVilbiss MBC or JGA

  Part

FORMULATION DATA BASE CONTROL LIST

White Spirit : 30.0 . Silicone Oil Emulsion (E 1044, 35%) 20.0 . Antistatic Agent (Water soluble) 0.5 . The above milky white emulsion is suitable for filling into trigger and aerosol packs.