PROJECT NAME: SOLID STATE AREA LIGHTING FIXTURE TYPE ...

have the same optical pattern. LED refractors produce standard site/area distributions. Panels are field replaceable and field rotatable in 90° increments. LED DRIVER(S) Constant current electronic with a power factor of >.90 and a minimum operating temperature of -40°F/-40°C . Driver(s) is/are UL and cUL recognized and mounted

  Constant, Current, Constant current

PROJECT TYPE: RAZAR SERIES-LED

Constant current electronic with a power factor of >.90 and a minimum operating temperature of -40°F /-40°C. Driver(s) is/are UL and cUL recognized and mounted directly against the Electrical Housing to facilitate thermal transfer, held down by universal clamps to facilitate easy removal. In-line terminal blocks facilitate

  Power, Block, Recognized

PROJECT TYPE: RAZAR WALLMOUNT-LED

Luminaire supplied with 20KV surge protector for field accessible installation.) LED EMITTERS High output LED's are utilized with drive currents ranging from 350mA to 1050mA. 70CRI Minimum. LED’s are available in standard Neutral White (4000K), or optional Cool White (5000K) or Warm White (3000K). Consult Factory for other LED options. AMBER ...

  Luminaire

SOLID STATE AREA LIGHTING SIGMA SERIES-PLED

luminaire, have the same optical pattern. LED refractors produce standard site/area distributions. Panels are field replaceable and field rotatable in 90° increments. LED Emitters High output LED's are utilized with drive currents ranging from 350mA to 875mA. 70CRI Minimum. LED’s are available in standard

  Area, Site, Luminaire

RNTS 4 ROUND - US Pole Company Inc.

specifications 4" round straight steel 4" diameter, fabricated from high grade structural steel tube. shaft conforms to astm-a-501-68 specifications.

PROJECT TYPE: RAZAR SERIES-LED

RAZAR SERIES-LED 525mA 700mA 1050mA 24 40 48 80 120 Approximate Average Lumens – 4000K (Lumens median of all distributions) Watts Lumens 41 66 81 131 195

  Series, Razar, Razar series led

SQUARE STRAIGHT STEEL POLE PROJECT NAME: SNTS 4

exceeds minimum yield strength of 36,000 P.S.I. base telescopes and is circumferentially welded to pole shaft. Slotted bolt holes provide 1" flexibility on either side of bolt circle centerline. Anchorage (4) anchor bolts fabricated from hot rolled steel bar. Minimum yield strength of 50,000 P.S.I. bolts have "L" bend on one end and

  Strength, Anchorage

320W Constant Voltage + Constant Current LED Driver …

320w constant voltage + constant current led driver hlg-320h series specification model dc voltage rated current rated power output voltage adj. range current adj. range line regulation load regulation ± setup, rise time note.6 hold up time (typ.) voltage range note.5 frequency range power factor (typ.)

  Constant, Drivers, Current, Voltage, Constant voltage constant current led driver

Understanding LED Drivers - 1000Bulbs.com

Constant-Voltage Drivers Constant-voltage drivers power LEDs that require a fixed output voltage with a maximum output current. In these LEDs, the current is already regulated, either by simple resistors or an internal constant-current driver, within the LED module. These LEDs require one stable voltage, usually 12V DC or 24V DC.

  Constant, Drivers, Current, Voltage, 1000bulbs, Current driver

Hi-lume 1% 2-Wire LED Driver Forward-Phase Control Overview

The Hi-lume 1% 2-Wire LED Driver is a high-performance LED driver that provides smooth, continuous, flicker-free, 1% dimming for virtually any LED fixture, whether it requires constant-current or constant-voltage. Formerly part of the A-series family, it is the most versatile LED driver offered today due to

  Constant, Drivers, Current, Voltage, Led driver

Hi-lume 1% EcoSystem / 3-Wire L3D Driver Overview

high-performance LED driver that provides smooth, continuous 1% dimming for virtually any LED fixture, whether it requires constant-current or constant-voltage. It is the most versatile LED driver offered today due to its compatibility with a wide variety of LED arrays, multiple form factors, and numerous control options. Features

  Constant, Drivers, Current, Voltage, Led driver

www.i-enet - Adafruit Industries

The WS2811 is 3 output channels special for LED driver circuit. It internal include intelligent digital port data latch and signal reshaping amplification drive circuit.Also include a precision internal oscillator and a 12V voltage programmable constant current output drive. In the purpose of reduce power supply ripple, the 3 outp-

  Constant, Drivers, Current, Voltage, Led driver, Constant current

HV9910B Data Sheet - Microchip Technology

Jan 27, 2015 · • DC/DC or AC/DC LED driver applications • RGB backlighting LED driver • Back lighting of flat panel displays • General purpose constant current source • Signage and decorative LED lighting • Chargers Description HV9910B is an open loop, current mode control, LED driver IC. This IC can be programmed to operate in either a constant ...

  Constant, Drivers, Current, Led driver, Constant current

LED Dimming: What you need to know - Energy

Dec 10, 2012 · (average) current is constant (Constant Current) • Typically, power electronics components are used to create circuits which convert AC voltage into regulated LED constant (average) current ssl.energy.gov 10 eere.energy.gov

  Constant, Current, Energy, Voltage, Dimming, Constant current, Constant led, Led dimming

PROJECT TYPE: RAZAR SERIES-LED

LED DRIVER(S) Constant current electronic with a power factor of >.90 and a minimum operating temperature of -40°F /-40°C. Driver(s) is/are UL and cUL recognized and mounted directly against the Electrical Housing to facilitate thermal transfer, held down by universal clamps to facilitate easy removal. In-line terminal blocks facilitate

  Constant, Drivers, Current, Led driver, Constant current

LED Basics - Purdue University College of Engineering

observer due to higher average forward current being supplied to the LED. For maximum brightness, a constant current (i.e., the duty ratio of the current pulse is one) will be supplied to the LED. The advantage of this method over the AM diming is the absence of spectral slide and uniform dimming over different LED strings.

  University, Engineering, Constant, Current, College, Purdue, Constant current, Purdue university college of engineering

Electronic Control Transmission (ECT)

four terminals: VC, VTA, IDL and E. A constant 5 volts is applied to terminal VC from the engine ECU. As the contact point slides along the resistor with throttle opening, voltage is applied to the VTA terminal. This voltage increases linearly from 0 volts at closed throttle to 5 volts at wide-open throttle.

  Constant, Transmissions, Voltage