LDG AT-600ProII 600W Automatic Antenna Tuner

LDG pioneered the automatic, wide-range switched-L tuner in 1995. From its laboratories in St. Leonard, Maryland, LDG continues to define the state of the art in this field with innovative automatic tuners and related products for every amateur need. Congratulations on selecting the LDG Electronics AT-600ProII 600 watt automatic tuner.

  Automatic, Watt, Antenna, Tuner, 600w, At 600proii 600w automatic antenna tuner, 600proii, Watt automatic tuner

LDG IT-100 100-Watt Automatic Tuner for Icom Transceivers

Connect the other end of the supplied radio interface cable to the “Radio” jack on the back of the IT-100. Turn on the radio. Select the desired operating frequency and mode. Push and hold the TUNER/CALL button on the front of the radio for one second (until the Tuning LED comes on), then release. The transceiver automatically keys up with ...

  Radio

LDG AT-100Pro 100W Automatic Antenna Tuner

the supplied coax jumper cable, or a similar 50 ohm coax cable rated 125 watts or higher. Connect a 50-ohm antenna feedline coax to the ANT 1 jack on the back of the AT-100Plus, and optionally connect a second antenna feedline to the ANT 2 jack. The AT-100Pro is designed to interface directly with many popular ICOM and Yaesu transceivers,

LDG AT-200ProII 200W Automatic Antenna Tuner

automatic tuners and related products for every amateur need. Congratulations on selecting the LDG Electronics AT-200ProII 200-watt automatic tuner. The AT-200ProII provides fully- and semi-automatic antenna tuning across the entire HF spectrum plus 6 meters, at power levels up to 250 watts (100W on 6m).

  Automatic, Antenna, Tuner, Automatic antenna tuner, Automatic antenna, Automatic tuner

Z-100 Automatic Antenna Tuner - LDG Electronics

(e.g., ladder line), an external balun is required. The LDG RBA-1:1 balun will work with short random wires and the RBA-1 4:1 balun is suited for longer wires. Connect the HF antenna jack on your transmitter or transceiver to the Transmitter jack on the back of your Z-100 tuner using a coax jumper with standard PL-259 plugs.

  Antenna, Balun

LDG Z-100Plus 100-Watt Automatic Tuner

The power and radio plugs then connect to the tuner. The tuning process can start by either pressing the tune button on the tuner or the radio. For Yaesu FT-897 and 857, use the optional Y-ACC cable and plug the red end marked “Radio” into the radio’s ACC port.

  Radio

LDG AT-600ProII 600W Automatic Antenna Tuner

LDG pioneered the automatic, wide-range switched-L tuner in 1995. From its laboratories in St. Leonard, Maryland, LDG continues to define the state of the art in this field with innovative automatic tuners and related products for every amateur need. Congratulations on selecting the LDG Electronics AT-600ProII 600 watt automatic tuner.

  Automatic, Watt, Antenna, Tuner, 600w, At 600proii 600w automatic antenna tuner, 600proii, Watt automatic tuner

Review: The MFJ-994BRT and MFJ-998RT Remote Automatic ...

MFJ-994BRT 600-watt and MFJ-998RT 1500-watt weatherproof remote auto-tuners. Figure 1: MFJ-998RT on the left, MFJ-994BRT on the right. Remote Tuner Application A remote antenna tuner must be weatherproof, provide automatic or semi-automatic tuning, and it must be remotely powered. So for a given RF power handling and

  Automatic, Watt, Tuner

2022 Isata 3 Flyer - dynamaxcorp.com

GVWR (Gross Vehicle Weight Rating) - is the maximum permissible weight of the unit when fully loaded. It includes all weights, inclusive of all fluids, occupants, cargo, optional equipment and accessories. For safety and product performance do NOT exceed the GVWR.