Pathway Edger for TORO® Workman

Pathway Edger for TORO Workman Bishop Enterprises, Inc. 9033 Shelbyville Hwy. Bell Buckle, TN 37020 Tel: Fax: Look For Other Great BEI Products On The Web at Kutting Edge Mounting Instructions Figure #1 Mounting plate: The mounting plate for the Kutting Edge is to be mounted to the frame on the left side of the Workman between the front wheel and the oil cooler using the existing bolt holes. Remove the bolts prior to installation of the mounting plate. See the mounting plate illustration for the location of the mounting holes. Tighten the bolts securing the mounting plate. Main Control Arm: Attach the Edger arm to the side of the mounting plate by sliding the flanged end of the control arm over the stationary shaft welded to the side mounting plate. Locate the notch on the flange end of the control arm and line up with the welded retainer bracket. Rotate arm while sliding the arm onto the stationary shaft.

Kutting Edge Edger/Installation Instructions for TORO® Workman Page #4

Loading..

Tags:

  Workman, Pathway, Root, Edger, Pathway edger for toro, 174 workman

Information

Related search queries