PDS Amercoat 240

Protective Coatings Amercoat 240. Universal Epoxy Coating Product Data/. Application Instructions Physical Data Semi-gloss Formulated for direct-to-metal application with excellent Colour* .. Buff, Haze Grey, Pastel Green, substrate wetting while retaining excellent edge coverage Oxide Red, White Exceptional corrosion protection in salt and fresh water immersion and corrosive chemical environments Components .. 2. Surface tolerant, lowers the cost of surface preparation Curing mechanism .. Solvent release and chemical Excellent adhesion to tight rust reaction between components Compatible with water jetted or hand power tool cleaned surfaces Volume solids .. 87% (ISO 3233). Low temperature cure down to 18 C/0 F without additives Dry film thickness (per coat).. 100 300 microns (4 12 mils). or alternate curing agents Fast dry-to-recoat and rapid handling properties Number of coats .. 1 or 2. High-build (up to 300 microns) in one coat 2 2. Theoretical m /l ft /gal Abrasion resistant 25 microns (per mil).

Amercoat 240 None Dimetcote 9 Series, Amercoat 68 Series Amercoat 240 Amercoat 450 Series, PSX 700 Tank Coating System- Two coats of Amercoat 240 at 100 to 300 microns (4 to 12 mils) per coat, plus stripe coating over sharp edges, cutouts and welds, to give a total of 300 to 400 microns (12 to 16 mils) . Use contrasting colours for each coat ...

Loading..

Tags:

  Amercoat, Amercoat 240, Amercoat 240 amercoat

Information