Transcription of PermaFlash System- Data Sheet - Johns Manville
{{id}} {{{paragraph}}}
Example: marketing
PermaFlash System- Data Sheet - Johns Manville
Installation/ApplicationNotchedTrowelBru shCloth RagLight SprayPackaging and Coverage1. Do not apply material at higher coverages per square foot. Applying too much PermaFlash Primer will result in less adhesion than if the primer had not been used. When applied at the proper coverage, evaporation should occur within a few Nominal 1 16" (2 mm) thick layer of adhesive. Coverage, open and dry time rates can vary dramatically depending on the particular substrate and environmental conditions. Coverage rates stated herein are approximate only. If FM Global or UL approval is required, consult specific RoofNavSM or the UL Certifications Directory for specific application LifePrimer & Scrim: 24 months from manufacture dateBase: Indefinite in sealed container; Activator: 24 months; Cartridges: 12 monthsStorage ConditionsClean, dry, indoor environment, unopened containerTemperature Range (Protect from freezing)Primer: 20 F 90 F (-7 C 32 C)Cement & Scrim: 60 F 90 F (16 C 32 C)Primer Container SizeBox of six 32 oz (946 ml) bottlesPrimer Coverage Rate1150 ft2 ( m2)Cement Container SizesBase: gal ( l) pailActivator: oz ( l) jugBase & Activator: oz ( ml) cartridgesCement Coverage Rate220-25 ft2/gal ( - m2/l)Scrim Roll Size12" (305 mm) w x 300' ( m)Scrim Coverage300 ft2 ( m2) or 20 ft2 ( m2) - within kitPermaFlash Kit4 - oz ( ml) cartridges1 roll - 12" (305 mm) w x 20' ( m) scrim1 - 32 oz (946 ml) bottl
For disposal instructions, please refer to the safety data sheet. Precautions Handling Refer to product Safety Data Sheet (SDS) for additional information pertaining to this product and prior to use or handling. Roofing contractors must advise their crews to precisely follow all safety, storage, handling, preparation and application instructions.
Loading..
Tags:
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document: