IBC Code Revisions to Fire-Rated Glass in Doors

2012 IBC Limits Size of Fire-Rated Glass in Doors The 2012 IBC limits the size of fire-protection- rated glass, such as safety wired glass and safety glass ceramic, used in 60 and 90 minute doors to 100 sq. inches. If the door serves as a horizontal exit door in a fire wall it is further restricted to 100 sq. inches with no dimension exceed-

  Glass, Doors, Trade, Fire, 2012, 2012 ibc, Fire rated glass in doors

Steel Louvers L-700-RX, L-700-RX-TB, L-700-A, L-700-B, L ...

38 NATIONAL GUARD PRODUCTS, INC. Phone: 800-647-7874 Fax: 800-255-7874 www.ngp.com orders@ngp.com 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36

  L 700

CROSS-REFERENCECROSS-REFERENCE Continuous Hinge

CROSS-REFERENCECROSS-REFERENCE National Guard Products, Inc. Service ö Quality ö Delivery ö NO EQUIVALENT ö 4/17 Corporate Headquarters NATIONAL GUARD PRODUCTS, INC. 4985 E. Raines Road Memphis, TN 38118

  Cross, Reference, Cross referencecross reference, Referencecross

PEMKO TO NGP

PD Painted Dark Bronze DKB PW Painted White W-PC ... E EPDM N M Magnet M N Neoprene N NB Nylon Brush WH P Pile P PK PemkoPrene V, N R Neoprene Sponge N S Silicone S T TPV N V Vinyl V Items may not be completely identical. Check your catalog or request samples from NGP. Refer to our ... RAMP6 955 RAMP8A 957 RAMP9A 962 RAMP10A 951 RAMP11A 961 ...

Thresholds - NGP

Thresholds are furnished longer than ordered to allow for field sizing and fitting. 1/2" is added to thresholds under 61"; 1" is added to thresholds over 61". Unless noted, thresholds are punched for and provided with fasteners. Special Drilling and Notching is available; details must be provided with the order.

  Thresholds

Introduction to Steel Doors and Frames - Steel Door Institute

The Steel Door Institute created ANSI/SDI A250.6 Recommended Practice for Hardware Reinforcing on Standard Steel Doors and Frames as a guide to door reinforcement and the installation of door hardware. It should be referenced by hollow metal door installers. The correct hardware must be selected to ensure the door and frame are properly reinforced.

  Hardware, Doors, Door hardware

CARPENTRY TRAINING MANUAL (SPECIALISED CARPENTRY)

and a double door at each end. The elevation also shows that at the end of the building with the loading platform, the door is at the level of the stage floor; all the other doors are at grade level. FLOOR PLANS A floor plan is a cross-sectional view of a building. The horizontal cut crosses all openings regardless of their height from the floor.

  Doors

A Guide to Working With Copper and Copper Alloys

are used as plumbing fixtures, decorative hardware, archi-tectural trim, low pressure valves, gears and bearings. Tin Brassesare alloys made from copper, zinc (2% to 40%) and tin (0.2% to 3%). This fami-ly of alloys includes admiralty brasses, naval brasses and free-machining tin brasses. These alloys are used to make high-strength fasten-

  Hardware