Pryda Post Anchors Guide - March 2017

Pryda Timber ConnectorsPost anchor GuideMarch 2017A complete Guide to the design, specificationsand installation of Pryda post AnchorsPOST Anchors Guide March 2017 3 Pryda post Anchors Guide TABLE OF CONTENTS post Anchors General installation information 4 Design Capacities Summary 5 Important notes Bushfire Attack Resistance BCA 2012 guideline 6 Adjustable post anchor (PS) Convenient and fully adjustable for any practical post size. No checking of the post is required 7 Bolt Down post anchor (PSB) With knockout 3 mm adjustable washer- to facilitate adjustment after bolt holes have been drilled. Used for locating posts onto existing concrete or decking. 8 Centre Fix post anchor (PSCF) Generally used to hide the post anchor . The post is slotted at the bottom and bolted through the post and anchor , leaving only the bolt heads, nuts and washers visible. Can be bolted to existing concrete or decking or set into concrete 9 Centre Pin post anchor (PSCP) For use where the post anchor is NOT to be visible.

Most Pryda Post Anchors meet the requirements of the Building Code of Australia (NCC 2012), Volume 2. A minimum of 75 mm clearance between the underside of the Post Anchor saddle and the ground surface or paving level is recommended. Pryda Post Anchor embedded in to concrete footing shown 75mm min. clearance 300mm max. from

Loading..

Tags:

  Guide, 2017, Post, March, Anchor, Pryda, Pryda post, Pryda post anchors guide march 2017, Pryda post anchors

Information