Transcription of Resin Flow of ‘‘No Flow’’ Prepreg
{{id}} {{{paragraph}}}
ScopeThis test method is designed to measure theResin Flow of no flow Prepreg used for bonding and adhe-sion without formation of Resin bead as caused by flow of Applicable Test Size and ConfigurationA specimen shall consist ofmultiple plies of Prepreg cut approximately 102 mm [ in] x102 mm [ in]. If the reinforcement is a continuous fiberwoven fabric, the sides shall be cut on a bias to the fabricweave. Unless otherwise specified, the test specimen shallhave three Quantity and SamplingUnless otherwise specified,the number of specimens tested shall be as follows: For quali-fication testing, 3 specimens shall be tested, with the piecesfor each taken from areas of the Prepreg that represents thecenter and both edges of the material as impregnated.
1.0 Scope This test method is designed to measure the ResinFlowof‘‘noflow’’prepregusedforbondingandadhe-sionwithoutformationofresinbeadascausedbyflowofthe ...
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document:
{{id}} {{{paragraph}}}
To Out-of-Autoclave Prepreg Carbon Fibre, Prepreg, Laminate & Prepreg Manufacturing, 370HR Laminate/PCL-FRP-370HR Prepreg, BT/Epoxy Laminate and Prepreg C, Pultrusion, Specification for Base Materials for, Specification for Base Materials for Rigid and Multilayer Printed Boards, MATERIAL SAFETY DATA SHEET MSDS, SAFETY DATA, Prepreg thickness chart