Transcription of SETTLEMENT MARKERS - Geosmart
{{id}} {{{paragraph}}}
SETTLEMENT MARKERS The SETTLEMENT marker is used to measure a localised SETTLEMENT or heave of roads, slopes, embankments, utility pipes and cables. Concrete to be painted in yellow Painting Convex End Concrete Nail Concrete Nail 800 minimum Concrete 50mm Concrete Structure 100Ф PVC or Steel Tube Sand Fill 75 mm Ф hole filled with cement grout after Schematic diagram of installed SETTLEMENT placing in the steel rod. marker on concrete 25Ф Steel rod Schematic diagram of installed SETTLEMENT marker in soil Backfill Backfill soil Varied Length soil 75 mm dia Heavy duty PVC pipe with Cap 16 mm dia mild steel rod 50x50x4mm steel plate Cross section of 10 cms Utilities/Services Schematic diagram of installed SETTLEMENT marker on utility INSTALLATION AND MONITORING SETTLEMENT marker on Concrete SETTLEMENT marker for Utility Installed on a Pavement services SETTLEMENT marker in Ground The monitoring of SETTLEMENT marker is carried out by leveling survey and readings are taken at regular intervals to check any SETTLEMENT or heave.
The inclinometer probe is lowered down in to the casing and at every 0.5 m intervals it records the lateral movement. The raw data obtained is transmitted from the inclinometer probe to a read out or a PDA by Bluetooth technology. After the installation of inclinometer casing in the
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document:
{{id}} {{{paragraph}}}