Transcription of SIGMATHERM 175 - Sigma Paints
{{id}} {{{paragraph}}}
Example: barber
SIGMATHERM 175 - Sigma Paints
Page 1/2 October 20092 pages Revision of September 2005 heat resistant modifi ed alkyd aluminium fi nish heat resistant up to 175 C high brilliancy spray application improves the appearance a minimum drying time of 3 days at 20 C should be allowed before exposure to heat aluminium - gloss (1 g/cm = lb/US gal; 1 m /l = ft /US gal) g/cm 47 2% max. 411 g/kg (Directive 1999/13/EC, SED) max. 417 g/l (approx. lb/gal) 25 m per coat m /l for 25 m 3 hours at 5 - 10 C, 1 hour at 20 C min. 36 hours at 5 - 10 C, 16 hours at 20 C max. unlimited at least 12 months,longer storage period may affect the brilliancy previous coat; ( Sigmarine 24) dry and free from any contamination substrate temperature should be at least 3 C above dew point for heat resistant systems - see system sheet 3140 stir well before use the temperature of the paint should preferably be above 15 C, otherwise extra thinner may be required to obtain application viscosity too much solvent results in reduced sag resistance adequate ventilation must be maintained during application and curing (please refer to sheets 1433 and 1434) no thinner should be added approx.
page 2/2 October 2009 SIGMATHERM 175 no thinner should be added Thinner 20-05 for paint and recommended thinners see safety sheets 1430, 1431 and relevant
Tags:
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document: