Accelerating OpenCV Applications with Zynq-7000 …

Reference Design XAPP1167 (v3.0) June 24, 2015 www.xilinx.com 2 The design flow for this application note generally follows the steps below: 1. Develop and execute an OpenCV application on Desktop.

  Applications, With, Accelerating, Xilinx, Accelerating opencv applications with zynq, Opencv, Zynq

Zynq-7000 All Programmable SoC Software …

Zynq-7000 All Programmable SoC Software Developers Guide UG821 (v12.0) September 30, 2015

  Developer, Guide, Software, Programmable, Software developers guide

Zynq-7000 SoC Data Sheet: Overview (DS190) - All …

Zynq-7000 SoC Data Sheet: Overview DS190 (v1.11.1) July 2, 2018 www.xilinx.com Product Specification 3 Programmable Logic Xilinx 7 Series Programmable Logic

  Overview, Programmable, Programmable logic, Logic, Xilinx, Programmable logic xilinx

7 Series FPGAs Data Sheet: Overview (DS180)

7 Series FPGAs Data Sheet: Overview DS180 (v2.6) February 27, 2018 www.xilinx.com Product Specification 2 Spartan-7 FPGA Feature Summary Table 2: Spartan-7 FPGA Feature Summary by Device

  Series, Fpgas, Xilinx, Series fpgas

Product Obsolete/Under Obsolescence …

Efficient Shift Registers, LFSR Counters, and Long Pseudo-Random Sequence Generators 2 XAPP 052 July 7,1996 (Version 1.1) Divide-By 5 to 16 Counter in Two CLBs

XILINX ARTIX-7 FPGAS: A NEW PERFORMANCE …

Key Capability Overview . Smallest Package • Low-cost, wire-bond, chip-scale BGA packaging • Available in a 10x10mm package for maximum system integration

  Performance, Fpgas, Xilinx, A new performance

Platform Flash In-System Programmable …

Platform Flash In-System Programmable Configuration PROMs DS123 (v2.19) June 6, 2016 www.xilinx.com Product Specification 2 R When the FPGA is in Master Serial mode, it generates a

  Xilinx, Flash

Spartan-3AN FPGA Family Data Sheet (DS557) - Xilinx

Spartan-3AN FPGA Family: Introduction and Ordering Information DS557 (v4.2) June 12, 2014 www.xilinx.com Product Specification 3 Architectural Overview

  Specification, Xilinx

Xilinx XAPP1113 Designing Efficient Digital Up and …

Introduction XAPP1113 (v1.0) November 21, 2008 www.xilinx.com 2 R • DDC design files for multi-channel MRI, targeting both Virtex-5 and Spartan®-DSP

  Efficient, Designing, Digital, Xilinx, Xilinx xapp1113 designing efficient digital up and, Xapp1113

Xilinx DS060 Spartan and Spartan-XL FPGA …

Spartan and Spartan-XL FPGA Families Data Sheet 2 www.xilinx.com DS060 (v2.0) March 1, 2013 Product Specification R Product Obsolete/Under Obsolescence General Overview Spartan series FPGAs are implemented with a regular, flex-

  Spartan, Xilinx, Families, Spartan and spartan xl

AN4776 Application note - STMicroelectronics

Application note General-purpose timer cookbook for STM32 microcontrollers Introduction The timer peripheral is part of the essential set of peripherals embedded in all the STM32 microcontrollers. The number of timer peripherals and their respective features differ from ... The master/slave controller unit of the slave timer is configured to ...

  Notes, Applications, Controller, Slave, Application note, Slave controller

SSI Synchronous Serial Interface Master - Application Note

APPLICATION NOTE 2013-11-08 6/26 Art.No. 10021488 1. SSI Theory Synchronous Serial Interface (SSI) is a widely used serial interface standard for industrial applications especially, rotary encoders. It is a point-to-point connection from a master (e.g. PLC, microcontroller or other control systems) to a slave (e.g. the rotary encoder).

  Notes, Applications, Slave, Application note

Application Note Slave Controller - Beckhoff Automation

Slave Controller – Application Note PHY Selection Guide 1 1 Overview An EtherCAT Slave Controller (ESC) takes care of the EtherCAT communication as an interface between the EtherCAT fieldbus (Ethernet) and the slave application. EtherCAT uses 100Mbit/s full duplex Ethernet communication. EtherCAT G uses 1,000Mbit/s full duplex

  Notes, Applications, Controller, Slave, Application note, Slave controller, Application note slave controller, Slave application

MPC5121e Serial Peripheral Interface (SPI)

The purpose of this application note is to describe the serial peripheral interface bus controller (SPI) implemented on Freescale’s MPC5121e microcontroller. It describes how to config ure and use the programmable serial controller (PSC) and PSC centralized FIFO controller (FIFOC) in all supported SPI modes. 1.1 Objective

  Notes, Applications, Controller, Application note

Interfacing to High Speed ADCs via SPI - Analog Devices

This application note describes how to use the serial peripheral interface ( SPI) port on Analog Devices, Inc., high speed converters . In addition, this application note defines the electrical, timing, and procedural requirements for interfacing to these devices. The implementation is compatible with industry -standard SPI

  Notes, Devices, Applications, Analog devices, Analog, Application note

SMBus Quick Start Guide - NXP

• A slave is a device that receives or responds to a command. A system may not include a host. For example, a simple battery charging system is a hostless system. In an SMBus system, a device can be master only, slave only, or it may act as a slave most of the time, but in special instances it becomes a master. Table 3. Reserved SMBus addresses 1

  Guide, Quick, Start, Smbus, Slave, Smbus quick start guide