Standard Guide for Magnetic Particle Testing1

Designation: E709 08 Standard Guide forMagnetic Particle Testing1 This Standard is issued under the fixed designation E709; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon ( ) indicates an editorial change since the last revision or Standard has been approved for use by agencies of the Department of This guide2describes techniques for both dry and wetmagnetic Particle testing, a nondestructive method for detect-ing cracks and other discontinuities at or near the surface inferromagnetic materials. Magnetic Particle testing may beapplied to raw material, semifinished material (billets, blooms,castings, and forgings), finished material and welds, regardlessof heat treatment or lack thereof. It is useful for preventivemaintenance This Guide is intended as a reference to aid in thepreparation of specifications/standards, procedures and This Guide is also a reference that may be used To establish a means by which Magnetic particletesting, procedures recommended or required by individualorganizations, can be reviewed to evaluate their applicabilityand To aid in the organization of the facilities and person-nel concerned in Magnetic pa

Magnetic Particle Testing1 ... of heat treatment or lack thereof. It is useful for preventive maintenance testing. 1.1.1 This guide is intended as a reference to aid in the ... AMS-I-83387 Inspection Process, Magnetic Rubber AS 4792 Water ConditioningAgents forAqueous Magnetic

Loading..

Tags:

  Treatment, Water, Magnetic

Information

Related search queries