Standard Test Methods for Laboratory Compaction ...

Designation: D698 12 1 Standard Test Methods forLaboratory Compaction characteristics of soil UsingStandard Effort (12 400 ft-lbf/ft3(600 kN-m/m3))1 This Standard is issued under the fixed designation D698; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. Asuperscript epsilon ( ) indicates an editorial change since the last revision or Standard has been approved for use by agencies of the Department of Defense. 1 NOTE Editorial corrections made throughout in January Scope* These test Methods cover Laboratory Compaction meth-ods used to determine the relationship between molding watercontent and dry unit weight of soils ( Compaction curve)compacted ina4or6-in. ( or ) diameter moldwith a ( ) rammer dropped from a height of (305 mm) producing a compactive effort of 12 400 ft-lbf/ft3(600 kN-m/m3).

Standard Test Methods for Laboratory Compaction Characteristics of Soil Using ... sometimes referred to as the Proctor Test. ... fined by the compaction curve for a compaction test using standard effort. 3.1.5 standard optimum water content, w opt in %—in com-

Loading..

Tags:

  Tests, Laboratory, Standards, Methods, Soil, Characteristics, Compaction, Proctor, Standard test, Compaction test, Proctor test, Standard test methods for laboratory compaction characteristics of soil

Information

Related search queries