Transcription of StormTech Construction Guide An company
{{id}} {{{paragraph}}}
Example: bachelor of science
StormTech Construction Guide An company
Initial Anchoring of Chambers Embedment StoneBackfill of Chambers Embedment StoneUNEVEN BACKFILLI nitial embedment shall be spotted along the centerline of the chamber evenly anchoring the lower portion of the chamber. This is best accomplished with a stone conveyor or excavator reaching along the chambers evenly. Stone column height should never differ by more than 12 (300 mm) between adjacent chamber rows or between chamber rows and BACKFILLNo equipment shall be operated on the bed at this stage of the installation. Excavators must be located off the bed. Dump trucks shall not dump stone directly on to the bed. Dozers or loaders are not allowed on the bed at this stone must be brought up evenly with chamber rows. Perimeter must be fully backfilled, with stone extended horizontally to the excavation NOT BACKFILLEDPERIMETER FULLY BACKFILLEDCall StormTech at for technical and product information or visit " (300 mm) , Scour Fabric and Chamber AssemblyInstall manifolds and lay out woven scourgeo textile at inlet rows [min.]
Initial Anchoring of Chambers – Embedment Stone Backfill of Chambers – Embedment Stone UNEVEN BACKFILL Initial embedment shall be …
Loading..
Tags:
Information
Domain:
Source:
Link to this page:
Please notify us if you found a problem with this document: