PDF4PRO ⚡AMP

Modern search engine that looking for books and documents around the web

Example: marketing

Technical DaTa SheeT Polyethylene - Laminated Plastics

NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers complete material property values at 73 F (23 C) unless otherwise noted. Technical data SheeTPolyethylene(PE) Polyethylenes are semi-crystalline materials with excellent chemical resistance, good fatigue and wear resistance and a wide range of properties. Polyethylenes are easy to distinguish from other Plastics because they float in water.

POlYeThYlene GRaDeS high Density Polyethylene (hDPe) Representing the largest portion of the polyethylene applications, HDPE offers excellent impact resistance, light weight, low moisture absorption, and high tensile strength. HDPE is also non-toxic and non-staining and meets FDA and USDA certifica-tion for food processing. Benefits Abrasion ...

Fullscreen Download
Loading..

Tags:

  Sheet, Data, Hedp, Density, Polyethylene, Density polyethylene, Data sheet polyethylene

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Spam in document Broken preview Other abuse

Transcription of Technical DaTa SheeT Polyethylene - Laminated Plastics

Documents from same domain

Technical DaTa SheeT high Density Polyethylene

laminatedplastics.com

high Density Polyethylene (HDPE) Representing the largest portion of the polyethylene applications, HDPE offers excellent impact resistance, light weight, low moisture absorption, and high tensile strength. HDPE is also non-toxic and non-staining and meets FDA and USDA certifica-tion for food processing. Benefits Abrasion Resistant

  Hedp, Density, Polyethylene, Density polyethylene

Technical DaTa SheeT Polypropylene - Laminated Plastics

laminatedplastics.com

TYPICAL PROPERTIES of POLYPROPYLENE ASTM or UL test Property Homopolymer Co-Polymer Flame Retardant PHYSICAL D792 Density (lb/in³) (g/cm³) 0.033 0.905 0.033 0.897 0.035 0.988 D570 Water Absorption, 24 hrs (%) <0.01 0.01 0.02 MECHANICAL D638 Tensile Strength (psi) 4,800 4,800 4,300 D638 Tensile Modulus (psi) 195,000 - -

  Homopolymer, Polypropylene

Technical DaTa SheeT Plexiglass (PMMa)

laminatedplastics.com

TYPICAL PROPERTIES of ACRYLIC PMMA ASTM or UL test Property Acrylic PHYSICAL D792 Density (lb/in³) (g/cm³) 0.043 1.18 D570 Water Absorption, 24 hrs (%) 0.3 MECHANICAL D638 Tensile Strength (psi) 8,000 - 11,000 D638 Tensile Modulus (psi) 350,000 - 500,000 D638 Tensile Elongation at Break (%) 2 D790 Flexural Strength (psi) 12,000 - 17,000

  Pmma, Plexiglass

Technical DaTa SheeT Teflon (PTFe) - Laminated Plastics

laminatedplastics.com

(260 C). It is the most chemically resistant plastic available and only a few chemicals react with it. PTFE mechanical properties are low compared to other engineering plastics, but its integrity is maintained over a wide temperature range - from -400 to 500°F (-240 to 260°C).

  Teflon

Technical DaTa SheeT lexan (Pc) Polycarbonate

laminatedplastics.com

nTe Te inoration containe erein are typical ales intene or reerence an coparison prposes only Tey sol nT be se as a basis or esin specifications or ality control contact s or anactrers’ coplete aterial property ataseets.

  Lexan

Technical DaTa SheeT Polycarbonate

laminatedplastics.com

Polycarbonate is a tough, dimensionally stable, transparent thermoplastic that has many applications which demand high performance properties. This versatile thermoplastic maintains its properties over a wide range of temperatures, from -40”F ... Window Grade is optically clear, providing total luminous transmittance and a very low haze ...

  Polycarbonate, Transparent, Luminous, Transmittance, Luminous transmittance

Technical DaTa SheeT nylon - Laminated Plastics

laminatedplastics.com

se as a asis o esin specifications o ality contol contact s o anactes’ coplete ateial popety ataseets. all ales at F c nless oteise note. Technical DaTa SheeT nylon (Polyamide) The exceptional bearing and wear properties of Nylon make it one of the …

  Nylon, Sine

TECHNICAL DATA SHEET Mylar® - Laminated Plastics

laminatedplastics.com

Mylar® (Polyester Film) Mylar® exhibits superior strength, heat resistance, and excellent insulating properties. The unique qualities of Mylar® are found in many consumer, high tech, and electronic markets. Mylar® Polyester Film is ideally suited for a wide range of uses such as

  Film, Polyester, Mylar, Polyester film

Technical DaTa SheeT acetal (POM) - Laminated Plastics

laminatedplastics.com

Copolymer Acetal has superior performance in continuous high heat and hot water environments. Copolymer Acetal also tends to have less porosity than Homopolymer Acetal. Grades of Acetal aceTal cOPOlYMeR (unfilled) The copolymer grade offers excellent performance at a slightly lower cost than Delrin®. Certain grades are FDA, USDA, NSF,

  Copolymer

Technical DaTa SheeT PVc - Laminated Plastics

laminatedplastics.com

Dielectric Strength (V/mil) short time, 1/8" thick 544 1250 D150 Dielectric Constant at 60 Hz 3.2 3.7 D150 Dissipation Factor at 60 Hz .0096 - D257 15Volume Resistivity (ohm-cm)at 50% RH 5.4 x 10 3.4 x 1015 S available

  Sheet, Data, Data sheet, Dielectric

Related documents

JMM HIGH DENSITY POLYETHYLENE (HDPE) PE4710 …

www.jmeagle.com

JMM HIGH DENSITY POLYETHYLENE (HDPE) PE4710 PRODUCT SPECIFICATION Description: JMM manufactures High Density Polyethylene (HDPE) water pressure pipes for municipal and industrial transmission systems. Our pressure pipe is used in many types of applications such as potable water, sewer, drain, mining, irrigation, slip lining, and reclaimed water

  Hedp, Density, Polyethylene, Density polyethylene

HIGH DENSITY POLYETHYLENE (HDPE) PIPE

www.tucsonaz.gov

(A) High Density Polyethylene (HDPE) Pipe. HDPE pipe shall be manufactured from extra high molecular weight polyethylene pipe materials meeting the requirements of ASTM D3350-96. The pipe shall meet the requirements of cell classification PE345444C standard PE code designation PE3408 as defined by ASTM D3350-96 and D3350.

  Hedp, Density, Polyethylene, Density polyethylene

Chemical Resistance Chart for HDPE (High Density …

menda.descoindustries.com

HDPE Chemical Resistance Chart | Page 1 of 2 Chemical Resistance Chart for HDPE (High Density Polyethylene) The chemical resistance chart below is a general guide only. Please contact MENDA for specific applications. Acetaldehyde - GF Diethyl Benzene - FN Methyl Ethyl Ketone - NN Acetamide, Sat. - EE Diethyl Ether - FN Methyl-y-butyl Ether - FN

  Hedp, Density, Polyethylene, Density polyethylene

Carlon High Density Polyethylene

carlonsales.com

Density Polyethylene (HDPE) for use in underground and innerduct applications. Smoothwall offers superior protection, increases pathways of existing duct systems, allows extra channels for future cabling needs, and is ideal for jetting cable. Available in a wide range of sizes, colors, and options, Carlon HDPE is the only cable management ...

  Hedp, Density, Polyethylene, Density polyethylene

MATERIAL SPECIFICATION FOR HIGH DENSITY …

ranhillsaj.com.my

2.1 The High Density Polyethylene (HDPE) Pipe shall be made from base polymer and shall conform to the requirements as specified in MS 1058 Part 2: 2005. 2.2 The base polymer shall be a single grade of polyethylene, PE 100 with a derived …

  Hedp, Density, Polyethylene, Density polyethylene

POLYETHYLENE PRODUCTION TECHNOLOGIES

apet-eg.com

1. Bimodal HDPE (PRODIGY BMC), made up of two catalyst component, one for low Mwt, and the other for high Mwt ( advanced catalyst ) 2. Ziegler-Natta for narrow MWD HDPE and LLDPE 3. Chrome- based for medium to broad MWD HDPE and LLDPE • Co-monomer used : Butane-1/Hexene-1 • MI range: 0.01-150 • Density range: 0.9-0.970

  Production, Hedp, Technologies, Density, Polyethylene, Polyethylene production technologies

HDPE Data Sheet - Direct Plastics

www.directplastics.co.uk

HDPE Black PE300/PE-HWU (High Density Polyethylene) Colour: Black Density: 0.955g/cm³ Mechanical Properties Value Unit DIN/EN/ISO Tensile strength at yield 25 MPa 527/D638 Elongation at yield 9 % 527 Modulus of elasticity in tension 1000 MPa 527/D638 Modulus of elasticity in flexure 1000 -1400 MPa 178/D790

  Hedp, Density, Polyethylene, Density polyethylene

HDPE (4710) - National Pipe

nationalpipe.com

HDPE (4710) HDPE 4710 IPS & DIPS PRESSURE PIPE (8, 10”) Scope: This submittal designates the general requirements for High Density Poly-Ethylene Pressure Pipe from compound with a cell classification PE345464C as defined in ASTM Standard D-3350. Pipe: All pipe is manufactured in accordance with the specifications set-forth in AWWA C906 “Standard …

  Hedp, Density, Poly, Ethylene, Density poly ethylene

HDPE 4710 IPS & DIPS PRESSURE PIPE (4, 6”)

www.nationalpipe.com

HDPE (4710) HDPE 4710 IPS & DIPS PRESSURE PIPE (8, 10”) Scope: This submittal designates the general requirements for High Density Poly-Ethylene Pressure Pipe from compound with a cell classification PE445574C as defined in ASTM Standard D-3350. Pipe: All pipe is manufactured in accordance with the specifications set-forth in AWWA C906 “Standard …

  Hedp, Density, Poly, Ethylene, Density poly ethylene

Polyethylene & Polypropylene in Flexible Barrier Packaging

www.tappi.org

Crystallinity yFor polyethylene, the degree of crystallinity has the largest influence on barrier properties. yRandomly oriented, large crystals, create the most tortuous path. y% crystallinity can be measured and is influenced primarily by polymer type, but also by processing. yLDPE/LLDPE ~ 30% - 55% crystallinity yHDPE up to 85% crystallinity yIn addition to % crystallinity, …

  Barriers, Packaging, Flexible, Polypropylene, Polyethylene, Polyethylene amp polypropylene in flexible barrier packaging

Related search queries

Density Polyethylene HDPE, HDPE, Polyethylene, Density, Density Polyethylene, POLYETHYLENE PRODUCTION TECHNOLOGIES, Density Poly-Ethylene, Polyethylene & Polypropylene in Flexible Barrier Packaging