Technical Document: Power Separation ... - CommScope

SYSTIMAX SOLUTIONS Power Separation Guidelines for SYSTIMAX Installations July 20202 SYSTIMAX Solutions Power Separation Guidelines for SYSTIMAX General These guidelines are based on extensive testing and modeling performed by CommScope Labs and by standards committees (especially by TIA in the US). The guidelines outline the minimum requirements for registration of SYSTIMAX installations for the 25-Year Extended Product Warranty and Applications Assurance Program. The exception is for installations with SYSTIMAX x297/x298 cables where the guidelines outline in Section shall apply. Unless otherwise stated, the Power cables are assumed to be local or national safety regulations take precedence whenever their required Separation distances are larger than those specified in this document. For example: In the UK, if no mechanical divider is present between the data and Power cables, BS 6701 requires a minimum Separation distance of 50 mm (2 in) for voltages less than 600 In the USA, Article of NEC Ed 2002 states the following for Class 1 circuits: Communications wires and cables shall be separated at least 50 mm (2 in) from conductors of any electric light, Power , Class 1, non- Power -limited fire alarm, or medium Power network- Power

In the US, ANSI/TIA-942 Telecommunications Infrastructure Standard for Data Centers and ANSI/TIA-1005 Telecommunications Infrastructure Standard for Industrial Premises provide power separation requirements in Clause 7.3 and Clause 5.2 respectively. These requirements are fully in alignment with SYSTIMAX guidelines and can be adhered to

Loading..

Tags:

  Telecommunication, Premises, Commscope

Information

Related search queries