Bristle blasting

MasterSeal 550 - Master Builders Solutions

high-pressure water jetting grit blasting and grinding. Spalled concrete should be cut back to ... using a short, stiff bristle brush or roller. Trowel application can be undertaken as necessary. For heavy 6-10 mm depressions, honeycombs etc. use less gauging liquid and …

  Blister, Sealmaster, Blasting

Interzone 954 - AkzoNobel

Aug 21, 2017 · Dry bristle brushing will normally be adequate for accumulated dirt. Soluble salts should be removed by fresh water washing. Oil or grease should be removed in accordance with SSPC-SP1 solvent cleaning. Abrasive Blast Cleaning Abrasive blast clean to Sa2½ (ISO 8501-1:2007) or SSPC-SP6. If oxidation has occurred between blasting and

  Blister, Blasting

PRODUCT DATA SHEET: EPOXOLINE - SERIES 22

Series 22 exterior (sunlight) exposed for longer than maximum recoat requires scarification by abrasive blasting prior to topcoating. SURFACE PREPARATION ... Use high quality natural or synthetic bristle brushes. Roller: Recommended only for heavily-pitted steel substrates, applications over concrete or as part of the Series 215ML

  Product, Sheet, Data, Blister, Product data sheet, Blasting

PRODUCT DATA SHEET: ENDURA-SHIELD - SERIES 73

Brush blasting with fine abrasive is the preferred method of scarification. Recoat windows for other primers may apply. See those data sheets for ... Use high quality natural or synthetic bristle brushes. Note: Two or more coats may be required to obtain recommended film thicknesses. SURFACE TEMPERATURE Minimum 35°F (2°C) Maximum 120°F (49°C)

  Blister, Blasting

NIGP Commodity Codes (18th Edition)

ABRASIVES: 005-05-00 Abrasive Equipment and Tools : 005-14-00 Abrasives, Coated: Cloth, Fiber, Sandpaper, etc. 005-14-02 ABRASIVE BRISTLE BRUSHES, DISC SHAPED

  Code, Blister, Commodity, Nigp, Nigp commodity codes

Interzinc - AkzoNobel

Nov 23, 2016 · performance). If oxidation has occurred between blasting and application of Interzinc 22, the surface should be reblasted to the specified visual standard. Surface defects revealed by the blast cleaning process, should be ground, filled, or treated in the appropriate manner. A surface profile of 1.6-3.0 mils (40-75 microns) is recommended.

  Blasting, Interzinc

Carboguard 893 - Carboline

Brush Use a medium bristle brush. Roller Use a short-nap synthetic roller cover with phenolic core. APPLICATION CONDITIONS Condition Material Surface Ambient Humidity Minimum 4°C (40°F) 4°C (40°F) 4°C (40°F) 0% Maximum 32°C (90°F) 57°C (135°F) 43°C (110°F) 90% This product simply requires the substrate temperature to be above the ...

  Blister, Carboguard, Carboguard 893

POLYAMIDE EPOXY COATING GLOSS/SEMI-GLOSS V400

Aug 03, 2018 · Benjamin Moore & Co., 101 Paragon Drive, Montvale, NJ 07645 Tel: 866-708-9180 Fax: 888-248-2143 www.benjaminmoore.com M72 …

SikaTop Seal 107

oio SikaTop® Seal 107 Flexible, waterproofing and protective slurry mortar Description SikaTop® Seal 107 is a two-component, polymer-modified, cementitious waterproofing and protective slurry mortar for concrete. It is slightly flexible to tolerate fine cracks and suitable in both interior and exterior applications.