Cisco Catalyst 6500 And 6500 E Series
Found 3 free book(s)
show cable-diagnostics tdr - Cisco
www.cisco.comCatalyst Supervisor Engine 32 PISA Cisco IOS Software Command Reference OL-11437-03 Chapter 2 Cisco IOS Commands for th e Catalyst 6500 Series Switches with the Supervisor Engine 32 PISA show catalyst6000 show catalyst6000 To display the information about the Catalyst 6500 series switch, use the show catalyst6000 command.
![Cisco NetFlow Configuration [Cisco NetFlow] - Cisco](/cache/preview/6/f/d/d/b/3/c/1/thumb-6fddb3c1691f5e7ec03c5974bd48ef29.jpg)
Cisco NetFlow Configuration [Cisco NetFlow] - Cisco
www.cisco.comNetFlow records are exported for long lived flows (e.g. large FTP transfer). 1 minute is recommended and configuration is in minutes in IOS and seconds in MLS and NX-OS. • Catalyst 6500/7600 require enabling NetFlow export within MSFC and PFC. • The following command will capture NetFlow within the same VLAN for Catalyst
Cisco CCNA notes -- Tech Note
www.kccommunications.com6500 etc. use can CatOS or a Hybrid combination of IOS/CatOS on the switching processors and some have separate IOS on the layer-3 routing processors - fortunately, the CatOS is no longer required for CCNA . REMEMBER: VTP MODES on all Cisco Catalyst switches (flooded every 5mins & when ever there has been a change);