Dana Spicer

MERITOR BRAKE SHOE IDENTIFICATION CHART

4692 12.25” x 7.5” Dana Spicer “Fast Change II” C4692FC2 4 4692 12.25” x 7.5” Dana Spicer “U” C4692U 4 4693 15” x 4” Bendix 6 4701 16.5” x 7” Spicer XL C4701 11 4702 15” x 4” Meritor Q Plus Front C4702QP 8 4703 15” x 5” Meritor Q Plus Front C4703QP 8 4704 15” x 6” Meritor Q Plus Front C4704QP 8

  Nada, Spicer, Dana spicer

Illustrated Parts List - Dana

Spicer® Drive Axles Illustrated Parts List April 2013 D170, D170D, R170, R170D - Single Reduction - Tandem Axles D190, D190D, R190, R190D - Single Reduction - Tandem Axles

  Nada, Spicer

Service Manual - Dana Incorporated

Dana reserves the right to discontinue or to modify its models and/or procedures and to change specifications at any time without notice. Always use genuine Spicer replacement parts. Welding or machining on any axle component is prohibited unless noted otherwise in this document or other Spicer service literature.

  Nada, Spicer

Specifications Guide - Dana Incorporated

This guide is periodically updated throughout the year. The most current information can be found on dana.com/cv 5 Spicer® Single Reduction Single Drive Axles BLUE ...

  Guide, Specification, Nada, Spicer, Specifications guide

King Pin Kits - Stemco

king pin kits spindle bore and axle eye beam sizes make axle code oe kit number oe pin specs lip seal installation tool spicer / dana / eaton 02-aed; 02-aeg; e1200i/w; e1201i/w; e1320i/w 328342; 328344; 823079 1.794 x 9.05 st70-7

  Nada, Spicer

Dana Spicer Heavy Tandem Drive Axles - Drivetrain

• Use this book to order parts for your Dana® Spicer® Axle. • For convenience, part numbers ha ve been included for all pieces of the carrier assembly. Some of these parts, such as the carr ier and caps, are serviced only in kits or assemblies. Part numbers are for your reference only. Those parts not serviced separately are identified ...

  Nada, Spicer, Dana spicer, 174 spicer

Dana Spicer Tandem Drive Axles - Supermiller

2. The specification number assigned to the axle build by Spicer. The spec number will identify all the component parts of the axle as built by Spicer, including special OEM requirements such as yokes or flanges. 3. The axle model identification. 4. The production or service part number of the carrier assembly. 5. The gear ratio of the axle. 6.

  Nada, Spicer, Dana spicer

Mystik JT-6 Hi-Temp Greases

• Approved for use in Rockwell and Spicer universal joints. • JT-6 Hi-Temp No. 1 developed for applications where service conditions dictate a grease of softer consistency. • Both grades meet the highest performance categories of ASTM D4950 Automotive Grease Classification System, GC for wheel bearing service and LB for chassis service.

  Spicer

Illustrated Parts List - Canada-Wide Parts

Spicer® Tandem Axles Illustrated Parts List AXIP0085a January 1994 Single Reduction, Dual Range, & Double Reduction Addendum 461, 462, 463, 521, 581 46,000 - 65,000 lbs

  Spicer

Spicer Yoke & U-Joint Measuring

and include 5-153X (Spicer service kit – greaseable), 5-1310-1X (Spicer Life/SPL greaseable), and 5-1310X Spicer Life/SPL non-greaseable). For multiple series measurements, refer to the K350 catalog. With a Half-Round Driveshaft Yoke 1. Measure from the inside of the tab, as shown 2. The correct driveshaft/u-joint series will be

  Spicer

SKF Bearings and Seals

2015 Catalog 457601 Supercedes 457601, Dated 2008 SKF Bearings and Seals Heavy duty truck wheel end components Includes applications, specifications and interchanges