For Installation Usage And Maintenance
Found 3 free book(s)
Maintenance of Supplies and Equipment Army Materiel ...
dmna.ny.govTDA installation maintenance † 3–11, page 28 Delegation of authority to field commands to perform depot maintenance † 3–12, page 29 ... Maintenance of low usage equipment † 4–2, page 34 Unserviceable materiel † 4–3, page 35 Technical inspections † 4–4, page 35
Please read this manual carefully before installation and ...
images.thdstatic.comInstall the unit in a firm location that can support the unit’s weight. If the installation location cannot support the weight, or the installation is performed improperly, the unit may fall and cause serious injury and/or damage. 5. For all electrical work, follow all appropriate wiring standards, regulations, and the Installation Manual. 6.
Installation Guide
images.thdstatic.comtheir use, or if installation is in high wind area. Pre-drill all fastener holes with a 1/4" drill bit for Woodtite and Metaltite fasteners to accommodate for the thermal movement of the panel. Over-drill by an extra 1/16" for other fastener diameters. Failure to accommodate for thermal movement will cause buckling of