Hardietrim Boards
Found 4 free book(s)
TR1510 HardieTrim HZ5 Installation Instructions LR
www.jameshardiepros.comWhen installing HardieTrim boards over solid 2x sub-fascia use minimum 2 in., 16 gauge corrosion resistant finish nails. (see fastener guide below) Figure 19 roof sheathing roof framing roofing roof underlayment drip edge flashing HardieTrim board sub fascia HardieSoffit Panel HardieTrim Board 6 in.
HardieTrim Boards - Installation Instructions - BuildSite
www.buildsite.comThese instructions are to be used for HardieTrim® HZ™ Boards ONLY and are ONLY VALID in the following states: WA, OR, CA, NV, UT, ID, CO, WY, MT, AZ, NM. GENERAL REQUIREMENTS • Wood or steel must be provided for attaching HardieTrim boards. • Follow all appicable codes when installing HardieTrim boards.
HardieTrim Boards Products Description - James Hardie Pros
www.jameshardiepros.com32 HardieTrim® Boards Products Description HardieTrim® boards come finished with either the PrimePlus® factory primer and sealer or with ColorPlus® Technology. The ColorPlus® coating is a factory-applied, oven-baked finish available on a variety of James Hardie® siding and trim products. See your local dealer for details and availability of products, colors, and …
Installation Guide - James Hardie
includes.jameshardie.co.ukHardiePlank® cladding HardieTrim® NT3® profiles Thickness 8mm 25mm Length 3600mm 3655mm Width 180mm 90mm, 140mm Weight 11.2 kg/m² ²21.9 kg/m , 53.7/m² HardiePlank cladding and HardieTrim NT3 profiles have been assessed by the British Board of Agrément, and awarded BBA certificate number: No 04/4147.