High Pressure Control Valves
Found 8 free book(s)
Mallard Control Control Valves - MillCorp Ind
www.millcorpind.comMallard Open Yoke & Close-Coupled Control (Dump) Valves Models 5400 open yoke and 5450 close-coupled control (dump) valves are designed to meet the high pressure and erosive applications common to the oil and gas industry. These valves are ideally suited for pressure, level, temperature, and flow control applications on
Automatic Control Valves - Watts
media.wattswater.comSpecifying Automatic Control Valves is a critical balancing act. On one hand, you must have the utmost confidence not only in ... 116 50-01 Pressure Relief Control Valve ... 113-6 136-03ABC Solenoid Control Valve (w/High Capacity Controls) 127-1 210-01 One Way Flow Altitude Control Valve
Medium- and High-Pressure Fittings, Tubing, Valves, and ...
www.swagelok.comMedium- and High-Pressure Fittings, Tubing, Valves, and Accessories 1 MEDIUM- AND HIGH-PRESSURE www.swagelok.com Medium- and High-Pressure Fittings, Tubing, Valves, and Accessories Rated up to 60 000 psig (4134 bar) End connections up to 1 1/2 in. and 12 mm NACE® MR0175/ISO15156 compliance available
Head Pressure Control Valves - Parker Hannifin Corporation
sporlanonline.compressure is the control pressure which actuates the valve. The force on top of the diaphragm, which opposes the control pressure, is due to the air charge in the element. These two forces are the operating forces of the OROA valve that control the main port. When the outdoor ambient temperature changes, the condensing pressure changes.
Pressure reducing valves - WATTS EUROPE
www.wattsindustries.comPRESSURE REDUCING VALVES CONTENTS page l The pressure reducing valve : ... The pressure control is within the 1,5 to 5,5 bar range. A high-temperature diaphragm (2) and a flap valve (3) : resist high temperatures (up to 80°C). A stainless steel seat (4) : an exclusivity that protects from wear
BASIC OPERATION AND FUNCTION OF CONTROL VALVES
www.controlglobal.comvalves. liquid pressure recovery factor: The ratio (FL) of the valve flow coefficient (Cv) based on the pressure drop at the vena contracta, to the usual valve flow coefficient (Cv) which is based on the overall pressure drop across the valve in non-vaporizing liquid service. These coefficients compare with …
Check Valves, Flow Control and Priority ... - Sun Hydraulics
www.sunhydraulics.comSun check valves provide non-modulating on/off control, and Sun flow control valves provide flow modulation for control of metering and flow regulation in a variety of forms: Two port cartridges for check and flow control valves. placed ahead of an actuator or control device, these valves act Three port cartridges for priority flow control valves.
VALVES, FITTINGS & TUBING PRESSURE VESSELS & REACTORS
www.highpressure.com6 1 General Valve bodies through 100,000 psi are high tensile Type 316 stainless steel, 150,000 psi valve bodies are 17-4 PH stainless steel. Stem assemblies have non-rotating tips to prevent galling with valve seats. Packing is located below the stem threads to prevent contact with media (liquid or gas). Packing glands are equipped with locking devices or lock nuts.
Similar queries
Mallard Control Control Valves, Control, VALVES, High pressure, PRESSURE, Automatic Control Valves, High, Medium- and High-Pressure Fittings, PRESSURE www.swagelok.com Medium- and High-Pressure Fittings, Pressure Control Valves, Control pressure, Pressure control, Control valves, Valves, Flow Control and Priority