Model Hbm For Electrostatic Discharge Esd
Found 6 free book(s)
BCR420UW6Q / BCR421UW6Q
www.diodes.comESD Ratings (Note 8) Characteristics Symbols Value Unit JEDEC Class Electrostatic Discharge – Human Body Model BCR420UW6Q HBM 500 V 1B BCR421UW6Q 1,000 V 1C Electrostatic Discharge – Machine Model BCR420UW6Q MM 300 V B BCR421UW6Q 400 V C Notes: 5. For a device mounted with the OUT leads on 50mm x 50mm 1oz copper that is on a single-sided 1 ...
ESD protection up to ±10 kV according to IEC 61000-4-2 ...
assets.nexperia.comMIL-STD-883; human body model; HBM [1] - 10 kV VESD electrostatic discharge voltage machine model; MM [1] - 400 V [1] Measured from pin 1 to pin 2. [2] Device stressed with ten non-repetitive ESD pulses. PESD18VF1BLProduct data sheet All information provided in this document is subject to legal disclaimers.10 July 2018 ...
LM339, LM239, LM139, LM2901 Quad Differential …
www.ti.com(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. 7.2 ESD Ratings VALUE UNIT V(ESD) Electrostatic discharge Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±500 V Charged-device model (CDM), per JEDEC specification JESD22-C101(2) ±750 7.3 Recommended Operating Conditions
LP5907 250-mA, Ultra-Low-Noise, Low-I LDO
www.ti.com(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. 6.2 ESD Ratings VALUE UNIT V(ESD) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±2000 V Charged-device model (CDM), per JEDEC specification JESD22-C101(2) ±1000
Product Specification PE42441
www.psemi.comESD voltage HBM1, all pins V ESD,HBM 2 kV ESD voltage MM2, all pins V ESD,MM 100 V ESD voltage CDM3, all pins V ESD,MM 1 kV Notes: 1. Human Body Model (MIL-STD 883 Method 3015.7) 2. Machine Model (JEDEC JESD22-A115-A) 3. Charged Device Model (JEDEC JESD22-C101) Exceeding absolute maximum ratings may cause permanent damage. Operation should be
27 V ESD Protection Diode
www.onsemi.comESD Human Body model (HBM) Machine Model (MM) IEC 61000−4−2 Specification (Contact) 16 400 30 kV V kV Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1.