Offset Low Power Operational
Found 6 free book(s)
Low Noise, Precision Operational Amplifier Data Sheet OP27
www.analog.comThe OP27 precision operational amplifier combines the low offset and drift of the OP07 with both high speed and low noise. Offsets down to 25 µV and maximum drift of 0.6 µV/°C make the OP27 ideal for precision instrumentation applications. Low noise, e n = 3.5 nV/√Hz, at 10 Hz, a low 1/f noise corner
Introduction to comparators, their parameters and basic ...
www.st.cominput stage. The power consumption is, in that case, obviously smaller and the device cost is lower. 3.2 Input offset voltage - VIO (VTRIP) The input offset voltage (VIO) can be defined as the differential input voltage to apply in order to be at the toggling level. Input offset voltage limits the resolution of comparators.
LF353-NWide Bandwidth Dual JFET Input Operational Amplifier
www.ti.comThese devices are low cost, high speed, dual JFET 2• Internally Trimmed Offset Voltage: 10 mV input operational amplifiers with an internally trimmed • Low Input Bias Current: 50pA input offset voltage (BI-FET II technology). They • Low Input Noise Voltage: 25 nV/√Hz require low supply current yet maintain a large gain
AD8610/AD8620 Precision, Very Low Noise, Low Input Bias ...
www.analog.comOffset Voltage Drift (AD8610A/AD8620A) ΔV OS A < +125°C 0.8 3.5 μV/°C OUTPUT CHARACTERISTICS Output Voltage High V OH R L A < +125°C 3.8 4 V Output Voltage Low V OL R L A < +125°C −4 −3.8 V Output Current I OUT V OUT > ±2 V ±30 mA POWER SUPPLY Power Supply Rejection Ratio PSRR V
NE5532x, SA5532x Dual Low-Noise Operational Amplifiers ...
www.ti.comThe NE5532, NE5532A, SA5532, and SA5532A devices are high-performance operational amplifiers combining excellent dc and ac characteristics. They feature very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection.
MAX4475–MAX4478/MAX4488/MAX4489 - SOT23, Low …
datasheets.maximintegrated.comband, low-noise, low-distortion operational amplifiers offer rail-to-rail outputs and single-supply operation down to 2.7V. They draw 2.2mA of quiescent supply current per amplifier while featuring ultra-low distortion (0.0002% THD+N), as well as low input voltage-noise density (4.5nV/√Hz) and low input current-noise density (0.5fA/√Hz).