Steps To Remove Personal Protective Equipment
Found 5 free book(s)
LITHIUM BATTERY SAFETY - University of Washington
www.ehs.washington.edupresent electrical shock and arc hazards. Use personal protective equipment (PPE) and insulate or protect exposed conductors and terminals. EMERGENCIES Follow these steps if there is evidence of a battery malfunction (e.g., swelling, heating, or irregular odors). Use personal protective equipment, such as gloves, goggles/safety glasses and lab ...
1.WN GO 2. MASK OR RESPIRATOR 3. GOGGLES OR FACE …
www.cdc.govREMOVE PERSONAL PROTECTIVE EQUIPMENT (PPE) EXAMPLE 1. There are a variety of ways to safely remove PPE without contaminating your clothing, skin, or mucous membranes with potentially infectious materials. Here is one example. Remove all PPE before exiting the patient room. except a respirator, if worn. Remove the respirator after
Hazard Identification and Risk Assessment
www.osha.gov• Protective clothing and equipment ... Remove the hazard at the source - e.g. get rid of it or replace it b) Substitute it with something less hazardous. c) Isolate the hazardous process, item or ... practicable, provide personal protective equipment. g) Implement and monitor the controls you decide upon.
Cleaning and Disinfecting Your Facility
www.cdc.gov- Additional personal protective equipment (PPE) might be required based on the cleaning/disinfectant products being used and whether there is a risk of splash. - Gloves and gowns should be removed carefully to avoid contamination of the wearer and the surrounding area. • Wash your hands often with soap and water for 20 seconds.
Steps to put on personal protective equipment (PPE)
www.who.intSteps toput onpersonal protective equipment (PPE) 5 Place the impermeable gown over the scrubs. 6 Put on face protection: 6a Put on a medical mask. 6b Put on goggles or a face shield. OR, IF BOOTS UNAVAILABLE 7 If available, put a head cover on at this time. 8 Perform hand hygiene. 9 Put on gloves* (over cuff). While wearing PPE: