Tire demountingFound 10 free book(s)
5 MOUNTING AND DEMOUNTING TUBELESS TIRES In order for a tire to perform properly, it must be mounted on the correct size wheel . The following are general instructions
• Conditions resulting from without limitation, improper mounting/ demounting, under inflation, improper tire size, improper repair, defect in vehicle, abuse.
TIRE BASICS TIRE MOUNTING AND DEMOUNTING WHEEL BASICS Wheel width is the distance between the inside of flanges rounded to the nearest 1/2-inch. Be sure that the wheel width is a proper fit for the tire size you intend to mount on it.
1 MICHElIN® TRUCK TIRE DATA BOOK Truck tires, retreads, rv tires, and commercial light truck tires www.michelintruck.com 19th Edition
Limited Warranty - Terms and Conditions for Hankook Tires Eligibility This limited warranty applies to the original purchaser of any new tire manufactured by Hankook Tire Co.,Ltd bearing
Mounting and Safety Instructions 3 A tire cannot perform properly unless it is mounted properly on the correct size rim or wheel. The following
3 • High-end tire changer with manual tilt tower provides outside clamping up to 26”. • Heavy tower and cabinet for maximum rigidity saves wheels
General Data Glossary - Bias Apex Strip The apex strip is a wedge of rubber affixed to the top of the bead bundle. Bead Heel The bead heel is the outer bead edge that fits against the wheel flange. Bead Toe The bead toe is the inner bead edge closest to the tire centerline. Breakers Breakers are reinforcing plies of rubber-coated fabric placed under the buff line cushion to help
This instruction manual has been prepared especially for you. Your new tire changer is the result of over 25 years of continuous research, testing
iv • COATS H.I.T. 5000H2 Changer Safety Failure to follow danger, warning, and caution instructions may lead to serious personal injury or death to operator or bystander or damage to prop-