A GUIDE TO TORQUE VALUES - Norbar
Recommended Maximum Bolt Loads and Torque Values (UNC Threads) UNC Quality P S T A/F in Newtons N.m lbf lbf.ft Newtons N.m lbf lbf.ft Newtons N.m lbf lbf.ft in 1/ 4 4379 5.43 984 4.00 8320 10.3 1870 7.60 8980 11.1 2018 8.19 7/ 16 5/ 16 7344 11.2 1650 …
Download A GUIDE TO TORQUE VALUES - Norbar
Information
Domain:
Source:
Link to this page:
Documents from same domain
The Checking and Calibration of Torque Wrenches
www.norbar.com1. The calibration must be carried out in controlled temperature and humidity conditions. Records must be kept of the temperature during the calibration. 2. The torque measuring instrument is called a calibration device in the standard. This device must have an uncertainty of measurement no greater than +/-1% of reading.
A GUIDE TO TORQUE VALUES - Norbar
www.norbar.com(d) the final tightening sequence is achieved smoothly and slowly, until the torque tool indicates full torque has been obtained. * If lubrication has been applied to the bolt and/or the nut (other than the normal protective oil film), multiply the recommended torque by the appropriate factor shown in the table.
Related documents
template for bolt torque tables
legacy.garlock.comJan 14, 2000 · values shown. 1 The maximum recommended gasket stress on Multi-Swell™ 3760 is 10,000psi. Garlock Bolt Torque Values for .125" thick Compressed Sheet1 & GYLON® Ring Gaskets - ANSI B16.5 Class 150# Flanges Nominal Raised Face Raised Face Gasket Number Size of Bolt Torque Comp Force Max. Gasket Internal Min. Rec'd Min. Rec'd Max.
SERVICE Telephone +1 (570) 323-6181 (Direct ... - Lycoming
www.lycoming.comUse installation torque values shown in Table 1. Table 1 . Installation Torque Values. Torque Value All spark plugs 420 in.-lbs. (or 35 ft.-lbs.) (47. 5 Nm) ... the hyphen (-) identifies spark plugs that are neither recommended nor approved. * May also have 3/4-20 wire end. ** Formerly Unison . Table 5 . Long Reach Spark Plugs, 3/4-20 Lead Nut ...