Document A401™ – 2017

Document C401™ – 2017

1963, 1967, 1970, 1974, 1979, 1987, 1997, 2007 and 2017 by The American Institute of Architects ® ® To report copyright violations of AIA Contract Documents, e-mail The American Institute of …

AIA Introduction to Codes and Standards

Just as construction practices have evolved over time, so have the regulations that govern the design, construction, and occupation of the built environment. With few exceptions, these regulations—our building codes—do not become less stringent over time, and many elements that used to be considered as best practices are now

  Best, Construction, Building

SCOPE OF WORK CHECK LIST - Home | AIA Professional

The ’Specification’ document defines commercial conditions, codes, standards, assemblies, types and quantities. ... Architectural design and certification Structural design and certification ... Fire rated assemblies at modular splits on site Acoustical …

  Specification, Trade, Fire, Architectural, Fire rated

Design Development Quality Management Phase Checklist

Review any adjustment in the Project requirements B101-2007- 3.1.1 Review any adjustment in the Project budget for the Cost of the Work B101-2007- 3.1.1 Update zoning analysis and make any necessary adjustments to the project Fully develop the code compliance sheets with fire resistive rated construction,

  Review

Standard Form of Agreement Between Owner and Architect

($ ) in the aggregate for bodily injury and property damage. § 2.5.2 Automobile Liability covering vehicles owned, and non-owned vehicles used, by the Architect with policy limits of not less than ($ ) per accident for bodily injury, death of any person, and property damage arising out of the

  Damage, Automobile

Document A701™ – 2018 - AIA Professional

§ 1.2 Definitions set forth in the General Conditions of the Contract for Construction, or in other Proposed Contract Documents apply to the Bidding Documents. § 1.3 Addenda are written or graphic instruments issued by the Architect, which, by additions, deletions, clarifications, or corrections, modify or interpret the Bidding Documents.

  Construction, For construction

2020 Code of Ethics and Professional Conduct

Members should continually seek to raise the standards of aesthetic excellence, architectural education, research, training, and practice. E.S. 1.3 Natural and Cultural Heritage: Members should respect and help conserve their natural and cultural heritage while striving to improve the environment and the quality of life within it.

  Code, Should, Cultural, Ethics, Code of ethics

Document A133™ – 2019

The Construction Manager accepts the relationship of trust and confidence established by this Agreement and covenants with the Owner to cooperate with the Architect and exercise the Construction Manager’s skill and judgment in furthering the interests of the Owner to furnish efficient construction administration, management services, and

  Management, Agreement, Construction

Document C401™ – 2017 - American Institute of Architects

in the aggregate for bodily injury and property damage. ... The excess policy shall not require the exhaustion of the underlying limits only through the actual payment by the underlying insurers. § 2.8.4 Workers’ Compensation at statutory limits.

  Aggregate, Underlying, Exhaustion

Schematic Design 2A - AIA Professional

§3.2.5 Based on the Owner’s approval of the preliminary design, the Architect shall prepare Schematic Design Documents for the Owner’s approval. The Schematic Design Documents shall consist of drawings and other documents including a site plan, if appropriate, and preliminary building plans,

  Drawings, Schematics

Commercial Construction Agreement

by Contractor. If any dispute arises between Contractor and another Contractor and/or subcontractor as to which is responsible for any time of damage, the dispute shall be submitted to Owner for decision and Owner’s determination as to responsibility shall be final and binding. 9.

  Agreement, Between, Contractor, Subcontractor, Between contractor

HUB Subcontracting Plan (HSP)

*Continuous Contract: Any existing written agreement (including any renewals that are exercised) between a prime contractor and a HUB vendor, where the HUB vendor provides the prime contractor with goods or service, to include under the same contract for …

  Agreement, Between, Contractor

HOMEOWNER ASSISTANCE FUND U.S. DEPARTMENT OF THE …

Financial Assistance Agreement Recipient Name and Address: [Recipient to provide] ... relationship between the United States and Recipient. Protections for Whistleblowers. ... contractor, or subcontractor who has the responsibility to investigate, discover, or …

  Agreement, Between, Financial, Assistance, Contractor, Subcontractor, Financial assistance agreement

CONTRACTOR NON-DISCLOSURE AGREEMENT (NDA)

CONTRACTOR NON-DISCLOSURE AGREEMENT (NDA) Each contractor/subcontractor who may have access to non-public information under their contract must sign the form: Commitment to Protect Non-Public Information – Contractor Agreement. 1 . The . Agreement. is on the next page. Please be aware that separate . Agreements. are required for each contract.

  Agreement, Disclosures, Contractor, Subcontractor, Contractor agreement, Contractor non disclosure agreement

SAMPLE RENOVATION CONTRACT - Freddie Mac

Contractor is duly licensed to perform the Work as required by local laws and regulations. Article 9. Contractor’s Responsibilities. 9.1. Performance. Contractor will perform the Work in accordance with the Contract Documents. Contractor will be solely responsible for the means, methods, techniques, sequences and procedures of construction. 9.2.

  Renovation, Contractor

Information Technologies Professional Services Agreement

order to perform the Services under this Agreement. Consultant agrees that prior to releasing any Student Information to any subcontractor or agent, Consultant will require such subcontractor or agent to acknowledge its obligations as a "university official" and to agree to comply with the FERPA requirements articulated in this section.

  Services, Professional, Agreement, Subcontractor, Professional services agreement

U.S. Department of Labor PAYROLL Wage and Hour Division ...

(Contractor or Subcontractor) ; that during the payroll period commencing on the (Building or Work) day of , , and ending the day of , , all persons employed on sid proja etc hav e been paid thull weeklye f wages earned, that no rebates have been or will be made either directly or indirectly to or on behalf of said from the full

  Contractor, Subcontractor

SUBCONTRACTOR SAFETY RESPONSIBILITIES

requirement, as determined by the Contractor, shall govern. 2. Subcontractor shall perform and execute the work of the subcontract while complying with these Safety Responsibilities and any special or additional requirements communicated by the Contractor. Subcontractor will be directly responsible for

  Contractor, Subcontractor