Electrical Acceptance Tests

A 1,000 volt DC megger test and a turns ratio test shall be performed on CT's and PT's. The metering shall be calibrated. Engine-Generators and Automatic Transfer Switches . A continuity check and 1,000 volt DC megger test shall be performed on the generator

Generators

Download Electrical Acceptance Tests

Information

Domain:

Source:

Link to this page:

Please notify us if you found a problem with this document:

Other abuse

Documents from same domain

DESIGN GUIDELINE 5.6 PARKING STRUCTURES

umaec.umich.edu

Architectural Design equirements ... Structure decks sh all be either cast -in-place reinforced concrete or constructed with precast double tees with a minimum 4” top of tee or any other tested and approved technology for parking ... panels except as required by to be fire rated. Fire rated door assemblies shall be factory Code

Trade, Fire, Concrete, Architectural, Fire rated

DESIGN GUIDELINE 220020 HIGH PURITY WATER SYSTEMS

umaec.umich.edu

requirements. High purity water systems typically have high first and on going operational costs, therefore the A/E shall take particular care not to “over-specify” the system. The proposed system performance will be presented no later th en SD phase, for approval by the U …

Phases, Water

GROUNDING AND BONDING FOR ELECTRICAL

umaec.umich.edu

Grounding systemconductors making up the grounding mat and associated ground risers, and/or for encasement in concrete shall be No. 4/0 AWG bare, stranded copper. Ground conductors for power distribution equipment,all end-use equipment and all branch circuits, shall be insulated stranded copper conductors, color coded greenor (a continuous)

Bonding, Grounding, Grounding and bonding

Commissioning Plan

umaec.umich.edu

The Commissioning Plan is the vehicle by which the Cx process is planned and documented. The draft version of the Cx Plan for this project was produced by the Commissioning Authority (CxA). The Owner’s Commissioning Authority and the Contractor are responsible for developing the final Commissioning Plan and executing all commissioning activities.

Plan, Commissioning, Commissioning plan

Design Deliverables - Architecture Engineering and ...

umaec.umich.edu

On the "Design Deliverables" document, the Design Professional shall indicate the status of each required item (a check mark is interpreted to mean that an item has been included in the deliverables). On or attached to the "Design Deliverables" document, the Design Professional shall identify all items NOT included in the review package.

Design

DESIGN GUIDELINE 230030 LABORATORY VENTILATION

umaec.umich.edu

LABORATORY VENTILATION DG 230030 OCTOBER 2016 PAGE 1 OF 24 DESIGN GUIDELINE 230030 LABORATORY VENTILATION Information for mechanical design engineers as well as architects/lab planners regarding laboratory ventilation design at U-M, including but not limited to the following:

Laboratory, Ventilation, Laboratory ventilation

DESIGN GUIDELINE 5.2 ANIMAL FACILITIES

umaec.umich.edu

4.7 SBA Building Access Control 6.0 DG 230030 - Laboratory Ventilation 6.0 DG 263000 - Engine-Generator System . Reference Documents: “Guide for Care and Use of Laboratory Animals” , promulgated by United States Department of Health and Human Services, and the Regulations of the Federal Animal Welfare Act 9, CFR Parts ,1 2 and 3

Animal